18
HOW TO CLEAN
ENGLISH
How to clean the sensor
Open the PM2.5 sensor cover on the rear side of the product.
Clean the lens with a soak cotton swab with little water and wipe again with a dry cotton swab.
CAUTION
• Do not clean the main body control part and display part with alkali detergent.
• Do not clean the surface of the air purifier using sulfuric acid, hydrochloric acid or organic
solvent (thinner, kerosene and others). Do not put stickers on the surface. It may damage
surface of the product.
• Wipe with soft cloth when cleaning. There may be exterior damage by scratching or others.
• When cleaning the product, do not let water get into the product inside. Turn off power
and unplug the power cord before cleaning. (Always check whether fan is moving.)
!
How to clean exterior
Wipe the air purifier with a soft cloth wrung out in warm water. Especially, the air inlet around
can accumulate dust. Clean periodically.
How to clean the filters
Filter type
Classification
Cleaning cycle
How to clean
Dual Protection
filter
For washing
About 1 month
cycle cleaning
Clean the Dual Protction Filter with a vac-
uum cleaner or brush, etc., and if the con-
tamination is severe, wash with water.
Allergy HEPA Fil-
ter Powered by
3M
TM
Tech
For replace-
ment
About 12
months cycle
replacement
* The replacement cycle for Allergy HEPA
Filter Powered by 3M
TM
Tech and Triple
Care Filter may be different according to
the usage environment.
Triple Care Filter
1,MFL68181315,영어 2015. 6. 2. 오후 6:18 페이지 18
