Manuel D'installation
13
Instructions d'installation
Installation et réglage
Cette page décrit les méthodes d'installation et de réglage pour con-
figurer le contrôleur.
Pour utiliser le contrôleur, un environnement doit être établi dans
lequel le contrôleur et le dispositif (climatiseur/ventilation, etc.) peu-
vent communiquer entre eux et les dispositifs doivent être enreg-
istrés par le contrôleur.
Vous devez procéder à l'installation dans l'ordre suivant.
12
Cloud Gateway
FRANÇAIS
Numéro
Classification
Spécifications
Autres types
①
Alimentation
12 V
Utilisation de la puissance
de sortie de l'unité ex-
térieure.
②
Communication
RS485
Maximum 1 Km
③
Ethernet
10/100 Mbps
Wi-Fi
2.4 GHz
④
LED
2ea
Gauche (mode produit,
rouge) / Droite (alimenta-
tion, vert)
⑤
Interrupteur
Changer le mode
produit
Enregistrement (gradation
des LED)
↔
Utilisation
(éclairage des LED)
⑥
Réinitialiser l'ali-
mentation
-
Spécifications de
température.
0 ℃ ~ 40 ℃
Température d'utilisation
Température de
stockage
-20 ℃ ~ 60 ℃
Température de stockage
REMARQUE :
Le port USB (type C) est une fonction non utilisée dans le produit
correspondant.
ÉTAPE 1. Inspection de l'environnement d'installation et
réglage de l'adresse de l'équipement
Avant d'installer le contrôleur, vérifiez la configuration du réseau
avec le dispositif connecté à l'alimentation du contrôleur, et at-
tribuez au dispositif connecté une adresse qui ne se chevauche
pas.
ÉTAPE 2. Installation du produit
Installez le contrôleur et connectez les lignes d'alimentation et de
communication.
ÉTAPE 3. Rechercher un appareil d'unité intérieure
Recherchez le dispositif d'unité intérieure que vous souhaitez
utiliser et enregistrez-le sur le produit.
ÉTAPE 4. Installez l'application ThinQ et créez un compte
Voir le formulaire ci-joint 'Connexion de LG ThinQ et LG Electron-
ics'.
ÉTAPE 5. Connectez-vous et utilisez l'application ThinQ
Interverrouillage avec l'appli ThinQ pour contrôler/surveiller l'unité
intérieure recherchée.