10
Beginning Operation and Changing Mode
Press the
Power
button to begin operation. Press the
Power
button repeatedly
to change the operating mode.
• When the
Power
button is pressed, the product will turn on and operate in the
UVnano mode. Each time the
Power
button is pressed, the product operation
mode will change, from UVnano mode→Filter Drying mode→Product OFF.
• To turn on the Wi-Fi product connection mode, press and hold the Power
button for at least 3 seconds.
– The Wi-Fi connection status is indicated by the Wi-Fi operation indicator light.
Status of
Wi-Fi operation indicator light
Description
On
Completion of Wi-Fi product registration
Flashing
Activation of Wi-Fi product registration mode
NOTE
• Before opening the Top Cover, press the
Power
button to turn the case off.
• If the top cover is opened, the product automatically stops operating and
disables the function.
• The Filter Drying mode operates when the wearable air purifier is connect-
ed to the charging socket and inserted in the case.
• If the Wi-Fi function does not connect after 7 minutes, the Wi-Fi operation
indicator light will turn off.
• For detailed information regarding the Wi-Fi function, refer to the Using the
Smart Functions section.
UVnano Mode
The UVnano mode removes bacteria from the surfaces of the wearable air
purifier or mobile phone using ultraviolet rays (UVC).
• It takes about 30 minutes to complete.
• The UVnano mode operating status is indicated by the UVnano indicator light.
