- 22 -
- 23 -
- 24 -
- 25 -
- 26 -
- 27 -
- 29 -
- 28 -
- 30 -
- 31 -
- 32 -
- 33 -
- 34 -
- 21 -
- 35 -
- 36 -
- 37 -
- 38 -
- 39 -
- 40 -
- 41 -
■
■
Use■of■this■product■near■medical■equipment■and■inside■a■
medical■facility
Do
Wearers■of■medical■equipment■such■as■implanted■
pacemakers■or■defibrillators■must■carry■and■use■the■
product■at■least■15■cm■away■from■the■implanted■
device.
The product's signals may affect the performance of
electronic medical equipment.
Do
When■electronic■medical■equipment■other■than■
implanted■pacemakers■or■defibrillators■are■in■use■
outside■of■medical■facilities■(such■as■in■home■care■
settings),■check■with■the■device■manufacturer■to■
determine■how■the■device■is■affected■by■electrical■
signals.
The product's signals may affect the performance of
electronic medical equipment.
Do
Make■sure■that■the■product■will■not■emit■any■signals■
(turn■off■power,■put■it■in■Airplane■mode,■etc.)■if■within■
15■cm■of■those■around■you,■such■as■where■crowded■
and■you■cannot■move■freely.
Wearers of implanted pacemakers or defibrillators may be
nearby. The product's signals may affect the performance of
electronic medical equipment.
Do
Obey■rules■inside■medical■facilities■regarding■use■of■
the■terminal■in■such■facilities.
Not doing so may affect the performance of electronic
medical equipment.
■
■
The■materials■of■parts■used■on■the■product■are■as■follows.
Part
Material
Surface treatment
Display
Glass
-
Outer case (front)
PC resin
UV coating
Outer case (rear)
PC resin
UV coating
Power key, Volume key,
Q button
PC resin
UV coating
Tray
PC resin
UV coating
Speaker grill
Stainless steel
-
Camera lens decoration
AL
-
Camera lens
Glass
-
Camera lens cover
Transparent
acrylic resin
-
Qua logo (rear)
PET resin
-
Handling Precautions
These■precautions■are■provided■to■prevent■damage■to■
the■product■and■ensure■that■performance■can■be■fully■
demonstrated.
Thoroughly■read■these■precautions■to■ensure■correct■use.
■
■
Precautions■common■to■the■main■unit,■internal■battery,■
charging■equipment,■au■Nano■IC■Card■04■LE,■peripheral■
devices
●
Do not apply excessive force to the product during use. Be sure
not to put the product into a tightly packed bag or place a heavy
object on the product in a bag. Doing so might damage the
display or internal circuit board resulting in a malfunction.
Keeping an external device connected to the external connector
or earphone jack might damage the connector resulting in a
malfunction. Such damage and malfunction are not covered by
the warranty, even if there is no external damage.
●
To ensure waterproof property (equivalent to IPX5 and IPX7) of
this product, use the product with the tray tightly closed.
Note that the waterproof property is not guaranteed in every
usage condition. Do not allow water to get inside the product or
splash water on the charging equipment or optional accessories.
Do not attach/remove the tray in the rain or with water drops on
the surface of the product. Doing so might cause water intrusion
resulting in internal corrosion.
Malfunctions determined to be caused by water intrusion are not
covered by the warranty.
●
Do not use the product in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5℃ to 35℃ and
humidity range of 45% to 85%.)
- Product unit
- au Nano IC Card 04 LE (when attached to the product unit)
●
Do not use in places subject to lots of dust or vibration. May
cause malfunction.
●
Occasionally clean the external connection terminal and
earphone terminal with a dry cotton bud. Dirty terminals may
result in a poor connection. Also do not forcefully clean the
terminals as this may deform them.
●
Clean the product with a soft dry cloth (such as the type used
for eyeglasses). Forceful rubbing with a dry cloth may scratch
the display. The display may be stained if splash or smear is left
attached to the surface. Wiping the product using alcohol, thinner,
benzene, detergent, glass cleaner, etc. might erase the printing
on the outer casing or cause malfunction.
●
Use as far away as possible from land-line phones, TVs, and
radios. Use nearby might affect them.
●
The product may become warm while charging etc., depending
on the situations, but this is not abnormal.
●
Do not place near corrosive chemicals or in places where
corrosive gas is generated. May cause malfunction.
●
Do not use outside when you can hear thunder. Doing so might
risk lightning strikes and electric shock.
●
Be sure to use only the specified peripheral devices. Use of
other devices might cause malfunction.
●
Do not put the product into a heating cooking device such
as a microwave oven or high-pressure container. May cause
malfunction.
●
The customer is not allowed to disassemble, modify or repair the
product. May cause malfunction. Modification of the product is in
violation of the Radio Law and Telecommunication Business Act.
●
Do not allow conductive foreign objects (metal fragments,
pencil leads, etc.) to come into contact with or get inside the
connection terminal, earphone microphone terminal, etc. to avoid
the connection terminal, earphone microphone terminal, etc.
from short-circuit.
●
If the product gets wet, immediately disconnect the power plug
of the AC adapter.
●
Do not use while driving a car or riding a motorbike or bicycle
or while walking. Use while driving a car or riding a motorbike is
prohibited by law. Use while riding a bicycle may be punishable
by some regulations.
●
Using or charging the product inside a bag or covered with
bedding, etc. may cause malfunction.
●
When using a charging equipment or external device, insert/
remove the connector straight to/from the terminal. Make sure
the orientation of the connector. Unless it's correct, it may
cause malfunction.
●
Do not expose the camera lens to direct sunlight for an
extended period. May cause malfunction.
●
Do not store or leave the product in places subject to direct
sunlight (e.g. in automobiles), places that get hot, places that
get extremely cold, or in humid or dusty places. May cause
malfunction.
●
Do not leave the equipment on unstable or sloping surfaces.
Be careful especially while charging or the vibrator is set. The
product might fall causing malfunction.
●
When charging the product, do not exceed the ratings for
outlets or wiring equipment.
■
■
Main■unit
●
The product's battery is built in, and cannot be replaced by
the customer. For battery replacement, contact an au shop or
Customer Service Center.
●
Do not forcefully press, tap, or intentionally subject the display
to strong impact. Doing so might cause scratching or damage.
●
Do not forcefully press your fingernails, sharp objects, or hard
objects against keys or display surface. Doing so might cause
scratching or damage.
The touch panel is designed to be lightly touched by fingers. Do not
apply strong pressure with your fingers or sharp-pointed objects
(such as fingernails, ballpoint pens, and pins) on the touch panel.
In the following cases, the touch panel may not work even if you
touch it. Note that it may cause malfunction.
• Operation with gloved hands
• Operation with fingernails
• Operation with a foreign object placed on the touch panel
• Operation with a protective sheet or sticker on the touch
panel
• Operation with water drops left or frozen on the surface
• Operation with wet or sweaty fingers
• Operation under water
●
Never use modified products. Use of a modified device violates
the Radio Law and Telecommunications Business Law. The
product has acquired the certification of conformity with
technical regulations for the specified radio station based on
the Radio Law, and to such regulations as technical conformity
based on the Telecommunications Business Law. And the
"Technical Conformity Mark " is checkable on au mobile
devices as a certificate.
<<How to check>>
On the Home screen
u
[基本機能 (Basic functions)]
u
[Settings]
u
[About tablet]
u
[Regulatory & Safety]
If the product is modified, technical standard compliance
becomes invalid.
Never use the product without the valid certification. Doing so
violates the Radio Law and Telecommunications Business Law.
●
Take care not to place magnetized items such as magnetic
cards, speakers and TV sets near the product, as it might cause
malfunction.
Putting a strong magnetism close to the product might cause
false operation.
●
Do not bring magnetic cards such as cash cards, credit cards,
and prepaid cards near to the product. Doing so might result in
loss of recorded information.
●
When you put the product in your bag, take care so that the
display does not come in contact with metal objects or other
hard objects. Doing so might cause scratching or damage.
Also, be careful not to scratch or damage the display by using a
strap whose metal or other hard part comes in contact with the
display.
●
When suddenly brought into a warm place from a cold place,
or when in a humid location, or when used where temperature
suddenly changes such as near the air discharge port of an air
conditioner, water droplets (i.e. condensation) sometimes form
inside the product. Note that when used under conditions such
as this, the humidity might cause corrosion or a fault.
●
While writing/reading data to/from a microSD memory card, do
not subject the product to vibration or impact or turn off the
power. Doing so might cause loss of data or a fault.
●
Use the product with the tray, etc. closed. If the tray is open, dirt
or water may get inside causing malfunction.
●
Do not allow liquids, metal objects, and other foreign matter to
get inside the microSD memory card slot or au Nano IC Card 04
LE slot inside the product. May cause malfunction.
●
Do not drop, trample, or throw the product or give a strong force
or vibration to it. May cause malfunction.
●
Do not place the product directly on sand at a beach, etc. Sand
or other small particles might get inside the microphone or
speaker, causing the volume to drop. If sand gets inside the
product's main unit, it might cause malfunction.
■
■
Touch■Panel
●
Putting stickers or sheets (e.g. commercially available protective
films, peep prevention sheets) on the display might cause
improper reaction of touch panel.
●
When carrying the product in your bag, take care not to put the
touch panel close to metals or other conductive materials, as it
might cause false operation of the touch panel.
■
■
Internal■battery
Li-ion00
(The internal battery of the product is a lithium-ion
battery)
When you purchase your product, the internal battery
is not fully charged.
Charge the battery before using the product. Also
charge the battery before using the product if you have
not used the product for a long time.
●
Use in very hot or cold environments, for example, when left in a
car with the windows closed in summer, will cause the battery
capacity to drop and shorten the available battery usage time.
This will also shorten the battery pack service life. Try to use the
internal battery as far as possible at room temperature.
●
After the internal battery is charged, battery power decreases
bit by bit even if the product is not used. The internal battery
may be discharged if the product is not used for a long time. It is
recommended to charge the product before use.
●
The internal battery is a consumable item. If the performance of
the internal battery does not recover (e.g. the usable time after
each charge has become extremely short), the battery is at the
end of service life, so stop use. Because the battery is a built-in
type, an au shop will accept holding over and repair for a charge.
You may not use the product for a certain period. Please be
forewarned. The life time of the internal battery depends on the
usage etc.
●
Internal batteries sometimes swell up as they approach the end
of their service life. This is due to the properties of lithium-ion
batteries, and is not a problem in terms of safety.
■
■
Charging■equipment
●
Do not wrap the cord of the specified charging equipment (sold
separately) around the adapter itself. Do not forcibly bend a
plug of the charging equipment or the connection between
the connector and power cord. Do not place heavy objects on
the adapter cord or USB cable, or apply unnecessary force by
strongly pulling them, etc. May cause malfunction.
●
When unplugging the plug of the specified charging equipment
(sold separately) from the power outlet or cigarette lighter
socket, hold and pull the power plug. Pulling on the cable might
damage it.
■
■
au■Nano■IC■Card■04■LE
●
Do not forcibly remove or insert the au Nano IC Card 04 LE. Be
careful not to exert excessive force when inserting the card into
your au mobile device.
●
You are responsible for any damage caused by inserting your au
Nano IC Card 04 LE into some other IC card reader/writer, etc.
●
Do not put stickers, etc. on the au Nano IC Card 04 LE.
●
Do not insert au Nano IC Card 04 LE with a conversion adapter.
May cause malfunction.
●
Do not damage the card (use in a hot place, throw into fire,
contact the metal part with foreign object, give an impact, bend,
apply a load, moisten, etc.). May cause data loss or malfunction.
■
■
Camera
●
When photographing important occasions, take a trial shot in
advance and check the shot image to make sure it is correctly
shot.
●
Do not shoot where shooting is prohibited.
■
■
Copyrights■and■rights■of■portrait
●
You are not allowed to copy, distribute, publish, modify or edit
the data you shot, recorded or downloaded using the product
without the consent of the copyright holder, except for personal
use, under the copyright law.
In addition, do not use or modify portraits or names of other
individuals without their consent, as it might infringe on rights of
portrait.
Note that shooting and recording may be restricted at some live
performances, shows and exhibitions even for personal use.
●
Be careful about the copyright and portrait right when posting
photos you shot, etc. on Internet homepages.
■
■
Backup■content■on■the■product
●
Please back up important content recorded or downloaded
for the product to an outside source. Content recorded to
memory on the product sometimes disappears or is altered by
unexpected factors, such as static electricity or a fault, repair,
mishandling, etc.
■
■
FCC■Compliance■information
●
The product is certified by Federal Communications Commission
(FCC).
FCC ID of this product is ZNFNSO.
Or you can check as follows.
<<How to check>>
On the Home screen
u
[基本機能 (Basic functions)]
u
[Settings]
u
[About tablet]
u
[Regulatory & Safety]
Available■Security■Codes
The product has various security codes that you can use.
The available security codes are as follows. Do not forget the
various security codes that are set as they are necessary for
various operations and contracts.
Make sure to change the initial value to your own unique number.
●
Security code
Example
of usage
a
To■do■remote■operation■of■voice■mail■and■call■
forwarding■services■from■a■landline■phone
b
To■use■Customer■Service■Center■and■to■do■various■
inquiries,■applications,■and■modifications■on■the■au■
homepage
Initial
value
A four digit number chosen by the customer and noted
on the application form
●
PIN code
Example
of usage
To prevent unauthorized use of the au Nano IC Card
04 LE by third parties
Initial
value
1234
Make sure to change the initial value to your own unique
number.
Privacy■Protected■Function
The function shown below is installed in the product to protect the
privacy of the saved data.
Function
Description
Screen
lock
Set Swipe, Knock Code, Pattern, PIN, or Password
to secure data when turning on the tablet or when
unlocking the screen.
PIN■Code
■
■
PIN■code
To prevent unauthorized use of the au Nano IC Card 04 LE by a third
party, you can set the product to require PIN code entry every time
the power is turned on. You also need to enter PIN code when setting
whether the PIN code entry is required.
If the PIN code is incorrectly entered three times consecutively, the
PIN code will be locked. You can unlock the PIN code using PUK code.
• The default PIN code is "1234" and does not need to be changed
but you can change the PIN code to any four- to eight-digit
number if necessary, and you can change settings so that the
PIN code must be entered.
If you require a PIN code to be entered, make sure to change the
number to your own unique number.
■
■
PUK■code
In case the PIN code is locked, you can unlock it by entering the
PUK code.
• PUK code is an eight-digit number given at the time of purchase,
which is printed on the back side of the plastic card on which
your au Nano IC Card 04 LE is attached.
• After entering the PUK code, you need to set a new PIN code in
"Change SIM PIN".
• If the PUK code is incorrectly entered 10 times consecutively,
contact an au shop, PiPit or Customer Service Center.
memo
• If PIN is locked, the product may restart to protect its security.
• PIN code is not reset by Factory data reset.
Notes on waterproof and dustproof
properties
This■product■has■a■waterproof■property■equivalent■to■IPX5
*1■
and■IPX7
*2
,■as■well■as■a■dustproof■property■equivalent■to■IP6X
*3
■
on■the■condition■that■the■tray■is■securely■attached■(based■on■
in-house■testing).
Before■using■the■product,■thoroughly■read■"Important■items■
to■remember■before■use"■and■"Tips■for■comfortable■use"■to■
ensure■correct■use.■Failure■to■follow■the■contents■described■in■
these■sections■may■cause■the■intrusion■of■water,■sand■or■other■
foreign■material,■resulting■in■overheating,■fire,■electric■shock,■
injury■or■a■fault.
*1 IPX5 equivalent means that the product will maintain its
operability as a communication device even if it is sprayed with
water from a 6.3 mm diameter nozzle at a distance of about 3
meters for more than 3 minutes at a rate of about 12.5 liters
per minute from any direction.
*2 IPX7 equivalent means that the product will maintain its
operability as a communication device with no water getting
inside the main unit even if it is gently submerged in a tank of
still tap water at room temperature to a depth of 1 meter for
about 30 minutes.
*3 IP6X equivalent means that the product will securely maintain
its function of no grit and dust getting inside the main unit
even after it has been placed in an apparatus with grit and dust
of diameters of 75 μm or less and shaken for 8 hours (ingress
of grit and dust cannot be prevented completely).
Proper■operation■of■the■product■in■every■possible■condition■
during■actual■use■is■not■guaranteed.■Malfunctions■determined■
to■be■caused■by■mishandling■by■the■customer■are■not■covered■
by■the■warranty.
■
■
Important■items■to■remember■before■use
●
Make sure that the tray is tightly closed. Waterproofness is only
effective when the covers are securely closed.
●
Do not open/close the tray if your hands or the main unit is wet.
●
Do not splash the product with or immerse it in liquid other
than tap water (seawater, a swimming pool, hot spring, soap,
detergent or water with bath salts, alcohol, juices, seasonings,
etc.). Do not use in places subject to direct splashing with pet
urine. If any liquid falls on the product, immediately rinse it off
with tap water.
Soap/Detergent/Bath salts
Seawater
Hot spring
●
Do not place the product directly on the sand at a beach, etc. Sand
or other small particles might get inside the microphone or speaker,
causing the volume to drop. If sand gets inside the product's main
unit from the gap, etc., it might cause overheating or a fault.
Sand/Mud
●
Do not use the product underwater.
●
Do not leave the product in a humid place such as a bathroom or
kitchen for an extended period of time.
●
Even after water is drained, the inner parts might be still wet.
Although you can use the product, do not place it near things
that must not get wet. Take care not to wet your clothes, bag or
contents of the bag.
●
Drain water if it becomes temporarily hard to hear the sound due
to water remaining in the microphone or speaker.
●
Avoid spraying the product with high-pressure water or
submerging it in water for extended periods of time, as the
product is not designed to withstand high water pressure.
●
Do not wash the product in a washing machine or ultrasound
bath.
●
Do not immerse the product into a bathtub. The product is not
designed to withstand the hot temperatures.
●
Extreme changes in temperature cause condensation resulting
in a malfunction. Wait until the main unit reaches room
temperature before you bring the product from a cold place into
a warm bathroom etc.
●
This product does not float on water.
●
Tray
Make sure that the tray is securely attached. Just a small
particle (a hair, etc.) on the seals can cause water leak.
Do not attach/remove the tray with gloved hands. Just a small
particle (a hair, etc.) on the seals can cause water leaks. Wipe
off any minuscule droplets of water or dirt with a clean dry cloth
before closing the tray.
If the tray is deteriorated or damaged, the waterproof property
becomes ineffective.
●
If any liquid other than plain water gets on the product
If any liquid other than plain water (e.g. seawater, detergent,
alcohol) gets on the product, immediately rinse it with plain
water.
You can wash the product under a mild flow (up to 6 liters per
minute) of tap water at room temperature (5℃ to 35℃ ) at a
distance of about 10 cm from the faucet or showerhead.
If the product gets dirty, instead of using a brush, wash it with
your hands holding the tray so that they do not open.
●
After the product gets wet
After the product gets wet, drain water, and wipe the main unit
and the tray with a clean dry cloth without removing the tray.
In cold climates, water on the main unit may turn to frost. Using
the product with frost may cause a fault. Do not leave the
product without wiping off water.
●
Rubber seals
Rubber seal in the tray plays an important part in waterproof/
dustproof property. Do not damage or remove the rubber seals.
Take care not to get the rubber seals caught when closing
the card slot cover. Forcibly closing the tray with the rubber
seals caught may damage them resulting in loss of waterproof/
dustproof property. Just a small particle (a hair, etc.) on the
seals can cause water leak. If any liquid other than plain water
(e.g. alcohol) gets on the rubber seals, it may cause deterioration
in durability.
Do not insert the sharp pointed object in the tray. Doing so
might damage or deform the product or damage the rubber
seals, causing water leak.
It is recommended to replace the parts for maintaining
waterproof/dustproof property once every two years regardless
of whether any abnormality is present. For information on part
replacement, contact an au shop near you.
●
Heat resistance
Do not immerse the product into boiling water or splash boiling
water on it. The product is not designed to withstand the hot
temperatures.
●
Shock
This product is not resistant to shock. Do not drop the product or
subject it to shock. Also, do not jab the speaker with any sharp
object. Doing so might damage or deform the main unit causing
water leak.
■
■
Draining■water■after■wetting■the■product
After the product gets wet, be sure to drain water from the
power key, Q button, volume key, earphone terminal, and external
connection terminal. If you use the product after it gets wet, water
remaining in those parts might wet your clothes or bag, or the
sound might become hard to hear.
Follow the steps below to drain water.
a
Carefully wipe the moisture off the main unit with
a dry towel, cloth, etc.
b
Hold the product firmly and shake it about 20
times in the direction of the arrow shown in the
figure until water drops no longer fly off.
When shaking the product, confirm the safety around you
and hold it firmly so as not to drop it.
c
Cover the power key, volume key, and Q button
with a towel, cloth, etc. and press each key two to
three times.
d
Wipe the moisture coming out from inside with a
dry towel, cloth, etc.
a
b
d
e
Place it on a dry towel, cloth, etc. and let it dry at
ambient temperature. (Around 30 minutes)
If it is not fully dried, the sound may become hard to hear.
Let it fully dry before use.
■
■
Precautions■on■charging
The supplied and optional accessories are not waterproof/
dustproof. Be sure to check the following points before and after
charging.
• Never charge the battery if the main unit is wet. Doing so might
cause fire, burns, injuries, or electric shock.
• Check that the main unit is not wet. If you are charging the battery
just after the product gets wet, drain water well and wipe remaining
water off with a clean dry cloth before charging.
• Do not touch the specified charging equipment (sold separately)
with wet hands. Doing so might cause electric shock.
• Do not splash water over the specified charging equipment (sold
separately) when using them. Do not use them near water such, as
in a bathroom, shower room, kitchen or washroom. Failure to do so
might cause fire, burns, electric shock, or malfunction. Do not bring
them into a bathroom, etc. even when you are not charging with
them. Failure to do so might cause fire, burns, electric shock, or
malfunction.
Bluetooth
®
/Wireless LAN (Wi-Fi
®
) Function
• The Bluetooth
®
function and the wireless LAN (Wi-Fi
®
) function of
this product conforms to the domestic standards of Japan, FCC
standards, and EC directives, and has been certified.
• The 2.4 GHz band used by wireless LAN (Wi-Fi
®
) and Bluetooth
®
devices is shared by various other devices. For this reason, the
communication speed and connectable range may be decreased,
or disconnection may occur, due to interference from other devices.
• Do not use this product in places where electromagnetic waves
are generated or near electric products, AV and OA equipment,
or other magnetized devices.
• Subjecting this product to magnetic or electrical noise might
increase noise and prevent it from performing communications.
(This product is particularly susceptible to noise when it used
near a microwave oven.)
• Using this product near a TV, radio or similar appliance might
cause reception interference and disrupt TV images.
• The searching might not be successful if there are multiple
wireless LAN (Wi-Fi
®
) access points near to the product or the
same channel is being used.
• Use of tablets on board is restricted. Follow the instructions of
each airline.
• The communication speed and connectable range vary depending
on the distance between communication devices, obstacles and
the devices to connect.
2.4■GHz■Frequency■Band■Precautions
The frequencies used by the Bluetooth
®
and/or wireless LAN
(Wi-Fi
®
) function of this product are in the 2.4 GHz band. In this
frequency band, other similar wireless stations, in-plant wireless
stations for mobile unit identification that require a license
to use, such as factory production lines, specific small power
wireless stations that do not require licenses, amateur wireless
stations (collectively called "other wireless stations" from here
on) are operated in addition to home electrical appliances such
as microwave ovens, devices for industrial, scientific and medical
devices.
1. Before using the product, make sure that "other wireless
stations" are not in operation nearby.
2. In the event that instances of radio wave interference have
occurred between this product and "other wireless stations",
immediately either relocate this product or stop operation of the
device (stop the emission of radio waves).
3. If you are unclear on any points or are troubled by anything,
contact an au shop or Customer Service Center.
memo
• The connections between this product and all other Bluetooth
®
and
wireless LAN (Wi-Fi
®
) devices have not been confirmed. Therefore,
connections with all Bluetooth
®
and wireless LAN (Wi-Fi
®
) devices have
not been confirmed.
• This product supports security features for wireless communications
that are compliant with the Bluetooth
®
and wireless LAN (Wi-Fi
®
)
standard specifications, but the security may not be sufficient
depending on the usage environment and configuration. Be careful
when making data communication using Bluetooth
®
or wireless LAN
(Wi-Fi
®
) function.
