LG RC8011A, Owner'S Manual

Operating Y

our

Dryer

13

O

perating Your Dryer 

Please read before using your LG Dryer for the first time

After removing the packaging, please carry out the following checks to ensure the LG Dryer is 
correctly installed and ready for use.

1. Check the dryer is well balanced by using a spirit level. If not, adjust the feet of the LG Dryer until

the machine is balanced.

2. Check the water container, condenser, control panel and drum to make sure everything is in place.
3. Set the machine to dry for 5 minutes to warm up the drum.
4. Open the door between loads the first few times you use the machine to allow any odours from the

interior of the LG Dryer to escape.

1. Turn the power on.

First, press the ‘‘Power’’ button. The indicator
light above the button will become illuminated
indicating that the machine is all set to run. 

2. Open the door.

3. Check the lint filter, is clean 

container and condenser. 

The lint filter near the door, should be emptied
after or before drying operation. 
Open the door and check if lint filter is cleaned.
If not, please clean it referring to page 18. 
Also check if water container or condenser
need to be emptied and cleaned for better 
drying results.

4. Place laundry into the drum after 

sorting. 

The clothes should be sorted by fabric type and
dryness level and all the strings and belts of
clothes should be well tied and fixed before
being put into the drum.
It is desired that you push the laundry to the
back to keep it away from the door seal.
If not, the door seal and clothes may be
damaged.

Turn the
power on.

Open the
Door.

Glass Door

Opaque Door

Check the
lint filter.

Pull

Push

Do not dry unwashed items in the tumble dryer.

CAUTION