50
Initial Settings
Initial Settings
In this menu system, there are several ways to cus-
tomize the settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings.
1.
Press
HOME ( )
and the Home menu appears.
2.
Select [Setup] > [Start] and press
ENTER ( )
.
3.
Use
v / V
to select the desired option.
4.
While the desired item is selected, press
B
to move
to the second level.
5.
Use
v / V
to select the second desired option.
6.
Press
B
to move to the third level.
7.
Use
v / V
to select the desired setting then press
ENTER ( )
to confirm your selection.
Some items require additional steps.
8.
Press
RETURN (
O
O
)
or
HOME ( )
to exit the
Setup menu.
Press
b
to go back to the previous level.
General Settings
General Settings
Auto Channel Set
This recorder is equipped with a frequency
synthesized tuner capable of receiving the analog and
digital channels.
1.
Select the [Auto Channel Set] option then press
B
.
2.
Use
v / V
to select the tuning band (TV or CATV)
option.
TV
is for over-the-air antenna reception.
CATV
is for cable subscribers.
3.
Press
B
to highlight [Start] icon.
4.
Press
ENTER ( )
to begin the channel search.
You can skip the analog channel scanning by press-
ing
B
while scanning analog channel.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
If you want to change the [Band] option, you must execute
the auto channel search after changing the [Band] option.
This Recorder supports only unencrypted channels for
cable subscribers.
Channel Edit
You can edit a channel manually (add, delete, etc.).
1.
Select the [Channel Edit] option then press
B
.
2.
Press
ENTER ( )
while the [Edit] icon is
highlighted. The Channel List menu appears.
3.
Use
b / B / v
/
V
to select a channel number then
press
ENTER ( )
.
Notes
Notes
Note
Note
First level
Second level
Third level
Settings and
Settings and
Adjustments
Adjustments