background image

HOW TO USE

19

ENGLISH

CAUTION

• If the water tank is taken out right after stopping the operation, there are cases of water re-

maining in the heat exchanger dropping into the main unit. (Wipe the dropped water with
soft cloth.)

• After taking out the water tank, do not touch inside the main unit.  It will cause failure of the

full water detection device.

• Periodically clean inside the water tank (about 1 time per week). 
• If it is used during winter or at low temperature, there is less moisture in the air, so dehu-

midification amount is also decreased.

• When you take out the water tank, make sure to stop the product.  If you take out during

operation, the compressor will stop and the fan operates for 3 minutes to vaporize the re-
maining condensed water inside the heat exchanger before complete stop.

!

Hold the top handle of the water tank and
softly take it out.

Open the drain lid of the water tank.

First insert the bottom part of the water tank
correctly into the hole, and then push it in.

Pour out the water inside the water tank.

Drain lid

Water tank

handle

Water tank

handle

How to empty water tank

1,MFL69020710,영어  2017. 8. 21.  오후 7:00  페이지 19

Summary of Contents for RD17GQGD1



























Reviews: