- 10 -
1. Application Object
This instruction is for the application to the LCD TV.
2. Adjustment
2.1 Adjustment overview
The unit is set to automatically adjust using the
factory automation equipment. However when errors
occur, it should be adjusted manually.
2.2 Auto Gain/Offset adjustment
2.2.1 RF Mode adjustment
2.2.1.1 Adjustment preparation
Conduct Heat Run at the RF fog signals for more than
30 minutes.
2.2.1.2 Auto Gain/Offset adjustment
Press IN-START Key to convert to the adjustment
mode using the adjustment (SVC) remote controller,
and press VOL+ Key at the Auto Gain menu.
(In case of RM-20LA70, press IN-START Key twice)
Once the adjustment is completed, press the Enter
Key to save and finish the adjustment.
2.2.2 Component Mode adjustment
2.2.2.1 Adjustment preparation
Conduct Heat Run at the RF fog signals for more than
30 minutes.
Connect the Pattern Generator to the Component
Jack (Y, Pb, Pr) of LCD TV.
2.2.2.2 Auto Gain/Offset adjustment
Convert the input mode to the component input.
Using the Pattern Generator (801GF, VG819) adjust
480P for resolution and Color Bar
signals for patterns. Or adjust Color Bar signals in
accordance with VG819.
Press the IN-START Key to convert into the
adjustment mode using the adjustment (SVC) remote
controller, and press VOL+ Key at the Auto Gain
menu.
Once the adjustment is completed, press the Enter
Key to save and finish the adjustment
ADJUSTMENT INSTRUCTION
