background image

P/N : 3828VA0220S    (NB03JA)

Your LG® brand LCD Rear Projection Television will be repaired or replaced as set forth below, if it proves to be defec-
tive in material or workmanship under normal use, during the warranty period ("Warranty Period") listed below, effec-
tive from the date ("Date of Purchase") of original consumer purchase of the product.  This warranty is good only to
the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.

LG® Brand

LCD Rear Projection Television

U.S. Limited Warranty

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIM-
ITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE
EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS
WARRANTY PERIOD ABOVE.  NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE
FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE,
INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR
ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.

Some states do not allow the

exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so
the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also
have other rights that vary from state to state.

THIS LIMITED WARRANTY DOES NOT APPLY TO:

The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.

WARRANTY PERIOD:

LABOR: One Year

from the Date of Purchase. Your unit will be repaired or

replaced with a new, substitute model or factory reconditioned unit, at the
manufacturer’s option. If repair, parts used in the repair may be new or
remanufactured.

Parts, except for Halogen Bulb: One Year 

from the Date of Purchase.

Halogen Bulb: 90 Days

from the Date of Purchase.

Replacement Units and Repair Parts are warranted for the remaining portion
of the original unit’s warranty period.

EFFECTIVE DATE OF WARRANTY: 

Your warranty period begins on the

date of sale to the original consumer / end user.  KEEP THE DEALER’S
DATED BILL OF SALE OR PROOF OF DELIVERY as evidence of the purchase
date.  You will be required to submit a legible copy of your bill of sale or
proof of delivery when requesting warranty service.

In-Home Service is available on this Unit, as
provided in this Warranty.

Please retain dealer’s

dated bill of sale or delivery ticket as evidence of
the Date of Purchase for proof of warranty, and
submit a copy of the bill of sale to the service per-
son at the time warranty service is provided.

Please call 

1-800-243-0000

To locate your nearest LG® Brand
Authorized Service Center and to schedule a
service appointment.

For further Instructions, see "For Service" below

damage caused in shipping or transit

service required as a result of improper installation,
including incorrect or insufficient AC supply (please
consult the owner’s manual for power supply require-
ments).

installation or repair of antenna systems, cable con-
verters, cable company supplied equipment, or other
components in a video system

set-up or adjustment on consumer controls, or dam-
age caused by improper adjustments

damage caused by other system components

any unit that  has been modified or incorporated into
any other product

replacement of batteries on the remote control.

replacement of the Halogen Bulb except within the
first 90 days 

damage (including cosmetic damage), failure, loss or
personal injury due to misuse, abuse, negligence,
improper maintenance or storage, or to acts of nature
or other causes beyond our control. (Causes beyond
our control include but are not limited to lightning
strike, power surges, power outages and water dam-
age.)

repair or replacement of warranted parts by other
than an LG® Brand authorized service centers.

units purchased or serviced outside of the U.S.A.

product where the original factory serial numbers
have been removed, defaced or changed in any way.

product sold and labeled as "as is, where is" or simi-
lar disclaimer.

a

Summary of Contents for RU-52SZ30





























































Reviews: