38
PROGRAMMING MODE
3. Time Set Up
Entering set up
mode.
You will see LqC1
Button
Display
Press the
Med Temp.
or the
Low Temp.
button until
appears in the display.
Press the
Start
button.
The display cycles through 2000 --> 0101 --> Sat --> 0000.
Press the
Start
button.
Press
Med Temp. (+)
or
Low Temp.(-)
button to select year
between
2000
and
2099
.
Press the
Start
button.
The machine sets up the year, then advances to the next
process automatically.
Press
Med Temp. (+)
or
Low Temp.(-)
button to select month
between
01
and
12
.
Press the
Start
button.
The machine sets up the month, then advances to the next
process automatically.
Press
Med Temp. (+)
or
Low Temp.(-)
button to select day
between
01
and
31
.
Press the
Start
button.
The machine sets up the day, then advances to the next
process automatically.
Press
Med Temp. (+)
or
Low Temp.(-)
button to select hour
between
00
and
23
.
Press the
Start
button.
The machine sets up the hour, then advances to the next
process automatically.
Press
Med Temp. (+)
or
Low Temp.(-)
button to select minute
between
00
and
59
.
Press the
Start
button.
The machine sets up the minute.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type - Press “High Temp.” twice.
MFL62512853_171010.indd 38
2017.10.10 9:51:52 AM
