Operating
10
Oper
ating
3
Channel Scan
Finds all channels available through the ‘CABLE IN’
source and stores all the active channels found.
1. Press Home and select [Setting] on the Home
menu.
2. Select [General] on the [Setting] menu.
3. Select [Channel Scan] on the [General] menu.
4. Press OK while [Ok] icon is highlighted
and begins the channel search. The unit
automatically searches for and saves the
channels.
Connecting to your
Home Network
This unit can be connected to a local area network
via the internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such as on-
line content services.
Wireless network connection
Access Point or a wireless router is needed for
Wireless network connection. The network
configuration and connection method may vary
depending on the equipment in use and the
network environment.
Wireless
Communication
Access Point or
Wireless Router
Broadband
service
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
Wireless network setup
For the wireless network connection, the unit
needs to be set up for network communication.
This adjustment can be done from the [Settings] on
the [All Apps] menu.
Preparation
Before setting the wireless network, you need
to:
-
Connect the broadband internet to the
wireless home network.
-
Set the access point or wireless router.
-
Note the SSID and security code of the
network.
SH940C-LN_BIDNLLK_OM_Eng_MFL67370759.indd 10
2014-07-23 �� 10:45:56
