background image

Connecting

15

C

onnecting

2

ARC

HDMI IN

HDMI OUT

HDMI OUT

HDMI OUT

ANTENNA

FM

PORT.IN

AUTO

CAL MIC

ARC

BD IN

DVD IN

STB IN

HDMI

ARC

BD IN

DVD IN

STB IN

HDMI

Rear of the receiver

TV

Blu-ray disc player, etc.

DVD player, DVD recorder, 
etc.

Satellite tuner, set 
top box, etc

Additional Information for HDMI

 

When you connect a HDMI or DVI compatible 
device make sure of the following:

 

-

Try switching off  the HDMI/DVI device and 
this receiver. Next, switch on the HDMI/DVI 
device and leave it for around 30 seconds, 
then switch on this receiver.

 

-

The connected device’s video input is set 
correctly for this receiver.

 

-

The connected device is compatible with 
720x480p (NTSC), 720x576p (PAL), 1280x720p, 
1920x1080i or 1920x1080p video input.

 

Not all HDCP-compatible HDMI or DVI devices 
will work with this receiver.

 

-

The picture will not be displayed properly 
with non-HDCP device.

 

If a connected HDMI device does not accept 
the audio output of the receiver, the HDMI 
device’s audio sound may be distorted or 
may not output.

 

Changing the resolution when the 
connection has already been established 
may result in malfunctions. To solve the 
problem, turn off  the receiver and then turn 
it on again.

 

When the HDMI connection with HDCP 
is not verifi ed, TV screen is changed to 
black screen. In this case, check the HDMI 
connection, or disconnect the HDMI cable.

 

If there are noises or lines on the screen, 
please check the HDMI cable (length is 
generally limited to 4.5 m(15 ft.)).

 

Depending on connection or playing status 
TV or external device connected to the 
receiver, the receiver may be switched to 
OPTICAL input source or ARC function.

 

The Control for HDMI function will not 
operate correctly in the following cases:

 

-

When you connect the receiver to a 
components which does not correspond 
with Simplink;

 

-

When you connect the receiver and 
components using other than HDMI 
connection. 
We recommend that you connect the 
receiver to products featuring “Simplink”. 
Depending on the connected 
component, the Simplink function 
may not work. Refer to the operating 
instructions of the component. 

 

,

Note

Summary of Contents for SH95TA-W

















































Reviews: