35
3
Place the deodorizing Black Filter in a shaded area
with good air ventilation for about 3 hours. Avoid direct
sunlight.
• At night, expose the deodorizing Black Filter to
artificial light for about 3 hours to refresh it.
• The deodorizing Black Filter is refreshed by light.
4
Place the deodorizing Black Filter in the filter tray.
• Be sure to align the slots on the bottom of the
deodorizing Black Filter with the tabs on the filter
beneath it.
5
Insert the filter tray into the product.
Note
Use a vacuum cleaner to remove the foreign substances
attached to the deodorizing Black Filter.
Caution
• Do not wash the deodorizing Black Filter with water. It
may shorten the filter lifespan or stain the product.
• The lifespan of the deodorizing Black Filter may be
reduced depending on the usage environment and it may
need to be replaced.
Cleaning the PM 1.0 Black Filter
1
Press the filter tray release button to open the filter
tray.
2
Slide the filter tray out completely and remove the
PM 1.0 Black Filter from under the deodorizing Black
Filter.
• Do not attempt to separate the two sections of the
PM 1.0 Black Filter.
3
Soak only the PM 1.0 Black Filter in a solution of
water and neutral detergent for about 30 minutes.
(The deodorizing Black Filter cannot be washed.)
• Make sure the neutral detergent is completely
dissolved in warm water (35 – 40°C).
• Fully immerse the PM 1.0 Black Filter in the soapy
water.