37
3
Insert the filter tray into the product.
Note
Only use water to clean the sensor. Use of anything else
may cause product failure.
Cleaning the Watering
Engine™
If water is not coming out of the Watering Engine™, it may
need to be cleaned.
1
Remove the top cover and use the handle to lift out
the water bucket. Remove the top and side water
bucket filters to reveal the Watering Engine™.
2
Turn the lid of the Watering Engine™ counterclockwise
to remove it.
3
Lift up and remove the Watering Engine™ from the
water bucket.
4
Clean the Watering Engine™.
• Wipe the interior and exterior with a soft cloth.
• Remove foreign objects in the holes using a paper
clip or small brush.
Storage
If the product will not be used for a long period, allow it to
dry completely and then store it in a dry, shady place.
Note
• Empty the water bucket.
• Clean the water bucket, water bucket filters, Watering
Engine™ etc. before storing.
Follow the instructions to prevent mold and bacteria
growth or odors.