SIMPLE MANUAL
Wireless
Sound Bar
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
SJ3
Copyright © 2017-2018 LG Electronics Inc. All Rights Reserved.
www.lg.com
ENGLISH
MODEL
Front Panel
Rear Panel
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Standby/ON
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Selects Function
/
· · · · · · · · · · · · · · · · · · · · · · · · · ·
Adjusts Volume
PORT.IN
· · · · · · · · · · · · · ·
Connect to a Portable device
OPTICAL IN
· · · · · · · · · · ·
Connect to an Optical device
USB
· · · · · · · · · · · · · · · · ·
Connect to a USB device
Subwoofer Connection
1
Place the wireless subwoofer near the sound bar and
follow steps below.
a
Connect the power cord of wireless subwoofer
and sound bar to the outlet.
b
Turn on the main unit :
The sound bar and wireless subwoofer will be
automatically
connected. The subwoofer's
green LED turns on.
Subwoofer Connection Manually
a
Press
Pairing
button on the rear of the wireless
subwoofer.
y
The green LED on the rear of wireless
subwoofer blinks quickly.
b
Turn on the main unit.
c
Pairin
g is completed.
y
The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1m to prevent wireless
interference.
!P
ASC/BASS BLAST/CINEMA:
Selects the sound effect.
NIGHT ON/OFF:
Turns down the volume at night.
WOOFER LEVEL +/-:
Adjusts the volume level of
subwoofer.
AUTO POWER ON/OFF:
Automatically turns on by an
input source.
Replacement of battery
Remote control
Additional Information
TV Connection
2
TV
a
Connect the sound bar to the TV using
Optical cable.
b
Set up [External Speaker (Optical)] on
your TV setting menu.
Additional Device Connection
a
Connect to the external device as follows.
TV
(Set-top
Box, Player
etc.)
b
Set the input source by pressing
F
on the
remote control or unit repeatedly.
Specification
Power requirements Refer to the main label.
Power
consumption
Refer to the main label.
Dimensions
(W x H x D)
Approx.
950 mm x 71 mm x 47 mm
(37.4 inch x 2.8 inch x
1.9 inch)
Bus Power Supply
(USB)
5 V
0
500 mA
Amplifier
(Total RMS
Output power)
300 W RMS
Design and specifications are subject to change without
notice.
LG Customer Information Center
1-888-542-2623
CANADA
Register your product Online!
www.lg.com
Industry Canada Statement
[For having wireless function (WLAN, Bluetooth,...)]
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
i. the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile
satellite systems;
ii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as
appropriate; and
iv. [for devices operating in the band 5250-5350 MHz
having an e.i.r.p. greater than 200 mW] antenna
type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the
e.i.r.p. elevation mask requirement set forth in
section 6.2.2.3 of RSS-247 shall be clearly indicated.
Users should also be advised that high-power radars
are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to
LE-LAN devices.
MFL69729880
SJ3.DCANLLK_SIM_ENG_FRE_MFL69729880.indd 1-4
2018-05-25 4:05:08
