Operating
47
Oper
ating
3
3. Surround environment option appears.
Select the left and right speakers by tapping
connected speakers. Then select [OK].
4. The speakers are ready to surround playback.
y
It is recommended to set the surround
speakers to same models.
y
The weak signal because of the long distance
between speakers or wireless router and
signal interference may cause abnormal
playback.
y
Depending on your wireless environment, the
grouping may be broken.
y
For smooth playback, it is recommended to
select the speaker connected by LAN cable
as a master speaker. If you set the master
speaker connected wirelessly, placed closer
from the speaker connected wired.
y
To enjoy the home cinema system without
Music Flow Player app, follow the below
steps.
1. Plug in the Sound bar
2. Connect the sound bar to home network.
(Wired or Wireless)
3. Plug in the rear speakers.
4. Connect the rear speakers to home
network. (Wired or Wireless)
5. Press
(Add) button on the sound
bar.
The sound bar beeps and [HOME
CINEMA READY] is scrolled on the
display window.
6. Press
(Add) button on the left rear
speaker and wait for a few seconds.
7. After the left rear speaker connection,
press
(Add) button on the right
rear speaker.
y
Configuring home cinema mode with existing
speakers, you need to update software of the
speakers to the latest version.
y
Check every speaker’s network connection
when you cannot set the speakers. If the
speakers are not connected to the home
network, refer the “Connecting the speaker
to your Home Network”.
,
Note
Summary of Contents for SJ9
Page 73: ......
