Connecting
19
Connecting
2
Manually pairing wireless subwoofer
When your connection is not completed, you can
check red LED on the wireless subwoofer and the
wireless subwoofer does not make sound. To solve
the problem, follow the steps below.
1. Press
Pairing
on the rear of the wireless
subwoofer.
Pairing
-
The green LED on the rear of the wireless
subwoofer blinks quickly.
(If the green LED does not blink, press and hold
the
Pairing
.)
2. Turn on the sound bar.
-
Pairing is completed. The green LED on the rear
of the wireless subwoofer turns on.
y
It takes a few seconds (and may take longer)
for the main unit and the subwoofer to
communicate with each other and make
sounds.
y
The closer the main unit and the subwoofer,
the better sound quality. It is recommended
to install the main unit and the subwoofer as
close as possible and avoid the cases below.
-
There is an obstacle between the main unit
and the subwoofer.
-
There is a device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
wireless LAN device.
-
Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m (3.3 ft) to
prevent wireless interference.
!
1 m
(3.3 ft)
,
Note
Summary of Contents for SL9YG
Page 60: ......
