Care and maintenance
15
How to dismantle parts
Separate the lamp by pulling it out (
➂
) while
slightly striking (
➀
) and rotating (
➁
) the lamp cover.
Turn the bulb counterclockwise. Max. 40 W bulb
for refrigerator is used and can be purchased at a
service center.
Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
Lamp in
refrigerator
compartment
Vegetable
compartment
cover
To remove a shelf, lift the left part of the shelf a
bit, push it to the direction
, lift the right part to
the diretion
, and take it out.
Lift the door rack to
direction holding both
sides and pull it out to
direction.
To remove the vegetable compartment cover, pull
out the vegetable compartment a bit to the front
, lift the front part of the vegetable compartment
cover as shown by
, and take it out.
2
1
•
Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
NOTE
•
Be sure to remove parts from the refrigerator door when removing the vegetable
compartment, snack corner and
refreshment center cover
.
NOTE
1
2
Insert the tool into the marked area (
) and push
the tool to disconnect.
Use the tool with the flat tip such as (-) screw driver.
Turn the bulb counterclockwise. Max. 40 W bulb
for refrigerator is used and can be purchased at a
service center.
