background image

unction Information

F

8

Introduction 

Our machine provides various washing methods which suits various conditions and

types of laundry.

FUZZY(Normal) Wash 

JEANS Wash 

WOOL Wash

QUICK WASH

SOAK Wash

DELAY START Wash

OPTION WASH 

Use this Program for everyday washing e.g. sheets, towels, T-shirts.  (refer to page 16)

SMART CLEANING

Use this program to get better rising performance.  (refer to page 16)

FAVORITE Wash

This setting allows you to store your FAVORITE wash conditions in the normal cycle memory.  (refer to page 19)

SILENT Wash

Use this program to wash quietly at night.  (refer to page 20)

Use this Program for heavily soiled durable garments e.g. overalls, jeans.
Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed. (refer to page 16)

Wool clothes (lingerie, wool, etc.) which may be easily damaged can be washed.  (refer to page 16)

The fibers of machine washable woolens have been specifically modified to prevent felting when they are machine washed. 
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
• Before washing your woolens check the care label for the washing instructions.
• When washing woolens use a mild Detergent recommended for washing wool.
• Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
• To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight. 

(The heat and tumble action of a dryer may cause shrinkage or felting of woolen garments.)

Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.) 
You may wish to handwash these articles and place them in the machine to spin dry.

QUICK WASH can be selected to wash lightly soiled clothes of less than 2.0 kg in a short time.  (refer to page 16)

SOAK Wash can be selected to wash heavily soiled laundry by soaking in water for some time to remove dirt and
grime.  (refer to page 18)

DELAY START Wash is used to delay the finishing time of the operation.
The number of hours to be delayed can be set by the user accordingly. (refer to page 24)

When the user needs only SPIN, RINSE/SPIN, RINSE, WASH/RINSE, WASH, WASH/RINSE/SPIN, 
SOAK/WASH/RINSE/SPIN.  (refer to page 23)

TUB CLEAN

Use this program to clean the inside of washing machine especially Inner tub & Outer tub .  (refer to page 21)

Washing according to the condition of laundry

Other washing method

Different types of laundry washing 

Summary of Contents for T1003ADP4








































Reviews: