22
OPERATION
EN
• When you select a wash programme, the water
level will be shown on the control panel.
• When water level is automatically detected, it
may differ depending on the amount of laundry
even though the same water level is indicated on
the control panel.
Wash
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press
Wash
button until the desired wash time is
selected.
Rinse
Use this option to change the number of rinses.
• Press
Rinse
button to change the number of
rinses.
• When the
Rinse
option is selected,
l
icon is lit.
• If selecting the maximum number of rinses, then
this option is deactivated.
NOTE
• This option is only available on some
programmes.
Spin
Use this option to change the spin strength. When
you press the
START/PAUSE
button after selecting
this option, the remaining time is indicated on the
display.
Using Basic Options
Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the
POWER
button.
2
Select a washing programme.
3
Press the
Delay
button to set the required
delay ending time.
4
Press the
START/PAUSE
button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
• This function cannot be set for less than 3 hours.
• To cancel this function, press
Delay
button
repeatedly until the reservation is cancelled or
press the
POWER
button to turn off and on
power.
Soak
This option can be selected to wash heavily soiled
clothes by soaking them in water for some time to
loosen dirt and grime.
• Press the
Wash
button until
u
and
k
icons
turn on simultaneously.
Setting
Child Lock
Use
Child Lock
function to disable the controls.
This function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the
POWER
button.
• When the controls are locked,
CL
and the
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
global_main.book.book Page 22 Tuesday, August 18, 2020 1:40 PM
