LG T9504TEFT0, Owner'S Manual

14

Before

Starting

to

W

ash

TUB DRY

F

unction

of

each

Button

NOTE

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by

8minutes at maximum and decreased by 4 minutes at maximum.

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically

adds rinsing, and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to

the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a

liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

TIME LEFT, DELAY START

(RESERVATION), ALARM INDICATION

• Time left

- During operation, the remaining time

is indicated.

• DELAY START INDICATION

(RESERVATION)

- When DELAY START

(RESERVATION)  program is selected, it
indicates the finishing time. (RES.=DELAY)

• Alarm indication

-When an error occurs, an error

message appears to indicate the abnormality. 
For example,           indicates that the lid is open.

WATER BUTTON

•

 Use to select the proper amount of water in relation

to the weight and type of laundry.

•

 Automatically controlled, but can be selected

manually by pressing the WATER Botton.

•

 WATER is automatically selected for

FUZZY(normal) program.
The following settings are indicated as the button is
pushed
7

8

•

 9 

10

1

2

•

 3 

4

5

•

 6 

7

CHILD LOCK FUNCTION

•

 Use to lock or unlock the control

buttons to prevent settings from
being changed by a child.
To lock, push the RINSE and
SPIN buttons simultaneously and
to unlock push them one more
time during the washing process.

(refer to page 25)

AIR DRY

•

 This button is used for air-drying of your

laundry.

•

 Air dry selections light up in sequence as

follows.
TUB DRY 

60

90

120

TUB DRY as the button is pushed.

WATER TEMPERATURE  
BUTTON (Only 2 valve)

•

 Use to select Water

Temperature.
Pressing the button allows
you to select  COLD 
WARM (HOT&COLD) 
HOT

COLD

respectively.
Default setting is COLD.

WASH. RINSE. SPIN BUTTON

•

Use when wash, rinse, spin
time need to be adjusted.

•

 The time increases when the

button is pressed . 

•

 If adjustments are needed

during the wash, press the
[start/pause] button before
making any changes. 

•

 When the button is  pressed

during washing, the remaining
time is displayed.