20
PROGRAMMING MODE
2. How to change special price
• SPCP (special cold price) is not available in dryer.
• SPrP (special warm price) is not available in dryer.
• SPHP (special hot price) is not available in dryer.
• SCPA (add super cycle price) is not available in dryer.
• SPCt (add super wash type) is not available in dryer.
NOTE
Entering set up
mode.
You will see lqC1
Button
Display
Press the
High Temp.
button.
Press the
med Temp.
or the
low Temp.
button until
appears in the display.
Press the
Start
button.
Press the
med Temp.
or the
low Temp.
button until
appears in the display.
Press the
Start
button.
Display previous special price.
Press
med Temp.(+)
or
low Temp.(-)
button to set special price.
(The vend price can be set from 0 to $9.95 in 5¢ increments.)
Press the
Start
button.
The machine sets up the regular price, then advances to the next
process automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch
• Card type - Pull the service card
• OPL/Coin type – Press “High Temp.” twice
MFL67863709_en_170328.indd 20
2017-03-28 �� 9:54:24
