35
ENGLISH
PROGRAMMING MODE
12. Top off time
Entering set up
mode.
You will see lqC1
Button
Display
Press the
High Temp.
button.
Press the
med Temp.
or the
low Temp.
button until
appears in the display.
Press the
Start
button.
Press the
med Temp.
or the
low Temp.
button until
appears in the display.
Press the
Start
button.
Display previous top off time.
Press
med Temp.(+)
or
low Temp.(-)
button to select time
between
1
and
99
.
Press the
Start
button.
The machine sets up the top off time, then advances to the next
process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch
• Card type - Pull the service card
• OPL/Coin type – Press “High Temp.” twice
• UULE (water level) is not available in dryer.
NOTE
MFL67863709_en_170328.indd 35
2017-03-28 �� 9:54:32
