42
PROGRAMMING MODE
PROgRAMMINg MODE - Test Mode
Diagnostic tests :
(display)
This program has been added for testing the dryer and detecting errors.
Entering the test mode
machine
Data
Name
Button
Display
Description
Card/
Coin
type
Enter-
ing
the test
mode
1. Entering
programming
mode
Insert service card (card type), Turn on/off toggle switch
(Coin type).
2. High Temp.
Press the High Temp. button.
Then
appears in the display.
3. Start
Enter the diagnostic test mode.
OPl /
Coin
type
1. Entering
programming
mode
Push and hold the High Temp. and Low Temp. at the same time.
After that push Med Temp. button for 3 times. Push
Start button.
2. High Temp.
Press the High Temp. button.
Then
appears in the display.
3. Start
Enter the diagnostic test mode.
MFL67863709_en_170328.indd 42
2017-03-28 �� 9:54:38