background image

29

Symptoms 

Reason

Solution

Clothes are 

wrinkled

Clothes have dried too long 

(overdried).

 

Over drying a load of laundry can 

lead to wrinkled clothes. Try a shorter 

drying time.

Clothes have been left in the 

appliance for too long after 

cycle ends.

 

Use the 

Anti crease

 option.

Clothes are 

shrinking

Garment care instructions are 

not being followed.

 

To avoid shrinking your clothes, 

always consult and follow fabric care 

instructions. Some fabrics will naturally 

shrink when washed. Other fabrics can 

be washed but will shrink when dried 

in the appliance. Use a low or no heat 

setting.

Lint is left on 

clothes

Lint filter has not been 

cleaned properly.

 

Remove the lint from the lint filter 

before every cycle. With the lint 

removed, hold the lint filter up to a light 

to see if it is dirty or clogged. If it looks 

dirty, follow the cleaning instructions. 

With some loads that produce high 

amounts of lint, it may be necessary to 

clean the lint filter during the cycle.

Laundry has not been sorted 

properly.

 

Some fabrics are lint producers (i.e., a 

fuzzy white cotton towel) and should 

be dried separately from clothes that 

are lint trappers (i.e., a pair of black 

linen pants).

Appliance is overloaded.

 

Divide extra large loads into smaller 

loads for drying.

Tissue, paper, etc., has been 

left in pockets.

 

Check pockets thoroughly before 

drying clothes.

Excess static in 

clothes after drying

Clothes have dried for too 

long (overdried).

 

Overdrying a load of laundry can cause 

a buildup of static electricity. Adjust 

settings and use a shorter drying time, 

or use Sensor Dry programmes. 

Drying synthetics, permanent 

press, or synthetic blends.

 

These fabrics are naturally more 

prone to static buildup. Try using fabric 

softener, or use shorter Manual Dry 

time settings.

Summary of Contents for TD-C80NPW

































Reviews: