LG TH2112DSAV, Owner'S Manual

29

SMART FUNCTIONS

ENGLISH

Open Source Software Notice 

Information

To obtain the source code under GPL, LGPL, MPL, 

and other open source licenses, that is contained in 

this product, please visit http://

opensource.lge.com.
In addition to the source code, all referred license 

terms, warranty disclaimers and copyright notices 

are available for download.
LG Electronics will also provide open source code to 

you on CD-ROM for a charge covering the cost of 

performing such distribution (such as the cost of 

media, shipping, and handling) upon email request 

to opensource@lge.com. This offer is valid for a 

period of three years after our last shipment of this 

product. This offer is valid to anyone in receipt of 

this information.

Smart Diagnosis

This feature is only available on models with the 

c

or 

d

 logo.

Use this feature to help you diagnose and solve 

problems with your appliance.

NOTE

•  For reasons not attributable to LGE’s negligence, 

the service may not operate due to external 

factors such as, but not limited to, Wi-Fi 

unavailability, Wi-Fi disconnection, local app 

store policy, or app unavailability.

•  The feature may be subject to change without 

prior notice and may have a different form 

depending on where you are located.

Using LG ThinQ to Diagnose 

Issues

If you experience a problem with your Wi-Fi 

equipped appliance, it can transmit 

troubleshooting data to a smartphone using the 

LG ThinQ

 application.

• Launch the 

LG ThinQ

 application and select the 

Smart Diagnosis

 feature in the menu. Follow 

the instructions provided in the 

LG ThinQ

application.

Using Audible Diagnosis to 

Diagnose Issues

Follow the instructions below to use the audible 

diagnosis method.
• Launch the 

LG ThinQ

 application and select the 

Smart Diagnosis

 feature in the menu. Follow 

the instructions for audible diagnosis provided 

in the 

LG ThinQ

 application.

1

Press the 

POWER

 button to turn on the 

appliance.
•  Do not press any other buttons.

2

Place the mouthpiece of your smartphone 

close to the 

c

 or 

d

 logo.

3

Press and hold the 

Tub Dry

 button for 3 

seconds or longer while holding the 

smartphone mouthpiece to the logo until the 

data transfer is complete.
•  Keep the smartphone in place until the data 

transfer has finished. Time remaining for 

data transfer is displayed.

4

After the data transfer is complete, the 

diagnosis will be displayed in the application.

NOTE

•  For best results, do not move the smartphone 

while the tones are being transmitted.

Max

. 

10 mm

Max. 

10 mm