To set the clock, follow these steps.
• With the thermostat turned ON, press the Clock key twice .............
• Use the Up/Down keys to set the hours ..........................................
• Press H to confirm settings ..............................................................
• Use the Up/Down keys to set the minutes ......................................
• Press H to confirm settings ...............................................................
• Use the Up/Down keys to set the day of the week………………………..
• Press A to confirm settings and return to main display .....................
Day
Hours
Minutes
Setting the Clock
Temperature Control
The Up/Down keys allow you to adjust the set temperature .......................
When you press either key, you will see the word SET and the
desired temperature will be displayed on screen.
Use the Up/Down keys to adjust the SET value .................................................
Press A to confirm settings and return to main display......................................
Note: In programmable mode, this new temperature is maintained only until the
next programmed comfort level.
In non‐programmable mode, this temperature will be constantly maintained.
Note: This new temperature is maintained only until the next programmed comfort
level. At this time, the thermostat will revert back to the programmed levels
Set
Icon
Set
Temperature
1.
Room Temp ‐ Indicates the current temperature sensor mode.
2.
Day Indicator ‐ Displays the current day.
3.
Frost Icon ‐ Displayed when the thermostat is in frost protection mode.
4.
Flame Icon ‐ Displayed when the thermostat is calling for heat, the flame icon
will flash when the optimum start function is in operation.
5.
Temperature Hold ‐ When a Temp Hold is active, HOLD FOR and the remaining
time period is displayed.
6.
Set ‐ Indicates when changes are being made to programs or temperature set
points.
7.
Holiday Indicator ‐ Displayed when the thermostat is in holiday mode.
8.
Current Temp ‐ Indicates the current sensor temperature.
9.
Program Cycle Indicator ‐ Displayed during programming only to show which
period is being altered.
10. Keypad Lock Indicator ‐ Displayed when the keypad is locked.
11. Units of Temperature ‐ Degrees Celsius or Fahrenheit.
12. Clock ‐ Digital clock display in 24h format.
LCD Display
This is the temperature you are trying
to achieve in your home.
Temperature Display
The temperature display information is driven by two different inputs; the
sensor measurement and the target temperature you have set.
Room Temperature
Set Temperature
This is the current room temperature.
Thermostat Settings (Slimline)
14
Slimline
Series
1.
2.
3.
4.
5.
6.
14
1
2
3
4
5
6
7
8
9
ris
10
11
12
Slimline
Series
1.
2.
5.
