9
ENGLISH
Battery Charging and Alerts
Open the Charging port cover and connect the charger to the Charging port.
Indicator Lamp
Red
Purple
Blue
Battery Status
Charging
80%
Completed
Press and hold the
Volume ( ) button
for 1 second to check the battery level using voice prompts
and the Indicator lamp.
Battery Status
Sufficient
Normal
Insufficient
Indicator Lamp
Blue flashes
three times
Purple flashes
three times
Red flashes
three times
Vibration Alert Settings
2 sec
The vibration alert is automatically set to the ON position when you
turn on the power.
To activate or deactivate the vibration setting, press and hold the
Volume ( ) button
for 2 seconds.
NOTE: When vibration is turned off, the HBS-A80 will not vibrate
when receiving an incoming call or when it is out of
communication range.
Out of Range
If the device connected to the product is out of effective communication range (33 feet / 10 meters),
the communication signal becomes weak and the communication is lost.
If the device comes back within effective communication range, the product automatically reconnects
to the device. If the device is not automatically reconnected, press the
Call button
on the product to
connect to it manually.
If a device that is not in use goes out of communication range when multiple devices are connected,
the product vibrates and a voice message indicates that the connection is lost. In this case, the
automatic reconnection function is not supported.
