background image

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

The LG TONE Free (TONE-FP8) is a lightweight wireless headset that uses 

Bluetooth

 technology.

This product can be used as an audio accessory for devices supporting either 

the A2DP or Hands-Free 

Bluetooth

 Profile.

Safety Precautions

The following safety precautions are provided to prevent any unexpected 

accident or damage. Please familiarise yourself with the safety precautions.  

The safety precautions are classified into “WARNING” and “CAUTION”.

!

 

WARNING:

 Failing to comply with the instructions may result in 

serious injury or death.

!

 

CAUTION:

 Failing to comply with the instructions may result in minor 

injury or product damage.

!

 WARNING

Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof). 

(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location 

such as a bathroom.

!

 CAUTION

Do not disassemble, adjust, or repair the product arbitrarily.

Do not place the product near excessive heat or flammable material.

The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a small 

component of the product.
Make sure that foreign objects do not enter the charger’s connectors 

(charging port and power plug). Failure to do so may result in fire or 

electric shock.
If you have a medical device implanted, contact your doctor before 

using this device.
This product has a built-in battery, and the battery cannot be removed 

or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly, it may 

explode.
The lithium-ion battery is a hazardous component that can cause injury.

Battery replacement by an unqualified professional can cause damage 

to your device.
Do not discard the battery arbitrarily. Follow the local procedure for 

discarding batteries.

Risk of fire or explosion if the battery is replaced by an incorrect type.

Do not store or transport at pressures lower than 11.6 kPa and at 

above 15000 m altitude.

Replacement of a battery with an incorrect type that can defeat a 

safeguard (for example, in the case of some lithium battery types).

Disposal of a battery into fire or a hot oven, or mechanically crushing or 

cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding 

environment that can result in an explosion or the leakage of flammable 

liquid or gas.
A battery subjected to extremely low air pressure that may result in an 

explosion or the leakage of flammable liquid or gas.
Do not carelessly throw away old batteries. It can cause an explosion or fire. 

The disposal method may vary by country and region. Dispose of it in an 

appropriate manner.

 

NOTE

If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Wearing earbuds for a long time may cause pain, and if humidity inside 

ears continues for a long time, it may cause skin trouble.

HD Speaker

If the communication network of the device you are connecting to supports 

HD Voice Calling, you can enjoy making voice calls and listening to music in 

high definition.

Battery Status Indicator

Status

Description

Bluetooth

 Search Mode The 

battery status indicator

 flashes in blue.

Battery below 20%

The 

battery status indicator

 turns on and 

off in red.

Battery 20% - 80%

The 

battery status indicator

 turns on and 

off in yellow.

Battery 80% or more

The 

battery status indicator

 turns on and 

off in green.

When there is a 

problem while charging

The 

battery status indicator

 flashes in red.

Charging  

(charger connected)

The 

battery status indicator

 turns on in red.

Charging complete  

(charger connected)

The 

battery status indicator

 turns on in green.

Out of Range

If the device connected to the product is out of effective communication 

range, the communication signal becomes weak and the communication is 

lost. The effective communication range may vary depending on surrounding 

and other conditions.

If the device comes back within effective communication range, the product 

automatically reconnects to the device. If the device is not automatically 

reconnected,

 touch the left or right earbud

 once to connect them.

LG TONE Free App

If you install the “LG TONE Free” app, you can use Check Earbud Battery, 

Voice Alert, Change Equalizer Mode, Check Last Connected Location Information, 

and Find My Earbuds functions. Check out the app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the Google Play 

Store or App Store or scan the QR code below.
It supports Android 7.0 or higher and iOS 11 or higher.

Google Play

App Store

Troubleshooting

If you see any of the following symptoms while using the product, make sure 

to recheck it. It may not be a malfunction.

Symptom

Cause and Solution

The power does not 

turn on

Check the battery level and charge it.

If unable to make a 

call with earbuds

If the mobile phone does not support headset 

and hands-free functions, you cannot use the 

calling features.

Check the battery level and charge it.

If unable to register 

earbuds to mobile 

phone

Check whether earbuds are turned on.

Check if the earbuds have entered the search mode. 

- While the earbuds are inserted in the charging 

case, press and hold the touch pad on the left 

or right earbud for 3 to 5 seconds to switch to 

the search mode.

If you replaced the 

earbuds or there is 

a problem with the 

operation  

(Factory reset)

While the earbuds are inserted in the charging 

case, press and hold the touch pad on the left or 

right earbud for 10 seconds or more.

- The battery status indicator of the charging 

case flashes red and the initialization to the 

factory status is carried out. After initialization 

to the factory status, reconnect the earbuds.

Specifications and Features

Item 

Comments 

Bluetooth 

Specifications

V 5.2 (Headset/Hands-Free/A2DP/AVRCP)

Battery

Earbud : 3.7 V / 68 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion

Music Play Time 

Earbuds & With 

Charging case

ANC Off : Up to 10 & Up to 24 hours*
ANC On : Up to 6 & Up to 15 hours*

Charging Time

Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime*

 When charging wired at room temperature

Rated Input 

Voltage

Earbud : 5 V 

0

 136 mA

Charging case : 5 V 

0

 500 mA

Operating 

Temperature

0 °C ~ +40 °C

Operating 

Humidity

5 % ~ 60 %

Dimensions 

(mm) /  

Weight (g)

Earbud : 21.2 mm (W) X 28.3 mm (L) X 23.2 mm (H) 

/ 5.2 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X 30 mm (H) 
/ 39 g

Frequency range 2402 MHz to 2480 MHz

*Duration of use may vary depending on the connected mobile device, 

features being used, settings, signal strength, operating temperature, 

frequency band, and other methods of use. 

Fast charging feature does not apply when charging case is placed on 

wireless charging device such as a pad.  

Wireless charging feature charges at a slower rate due to less power 

being transmitted to the charging case. 

Declaration of Confirmation

FCC NOTICE TO USERS:

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference 

that may cause undesired operation.

Changes or modifications not expressly approved by the manufacturer (or 

party responsible) for compliance could void the user’s authority to operate 

the equipment.

FCC Part 15.105 statement

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses 

and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio 

communications.
However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT NOTE:

To comply with the FCC RF exposure compliance requirements, no change 

to the antenna or the device is permitted. Any change to the antenna 

or the device could result in the device exceeding the RF exposure 

requirements and void user’s authority to operate the device.

DECLARATION OF CONFORMITY:

Hereby, LG Electronics declares that the radio equipment type this headset 

is in compliance with Directive 2014/53/EU. The full text of the EU 

declaration of conformity is available at the following internet address: 

http://www.lg.com/global/support/cedoc/cedoc#

Bluetooth

® is a registered trademark of Bluetooth SIG, Inc. worldwide.

Android, Google Play, the Google Play logo, and other related marks and 

logos are trademarks of Google LLC.

FCC ID: ZNFTONEFP8

Additional Information

1. Radio frequency exposure

This 

Bluetooth

 LG Stereo Headset is a radio transmitter and receiver. When 

in operation, it communicates with a 

Bluetooth

-equipped mobile device 

by receiving and transmitting radio frequency (RF) electromagnetic fields 

(microwaves) in the frequency range 2402 to 2480 MHz. Your 

Bluetooth

 

headset is designed to operate in compliance with the RF exposure 

guidelines and limits set by national authorities and international health 

agencies when used with any compatible LG Electronics mobile phone.

2. 

Bluetooth

 connection precautions

The following environments affect the range and reception of 

Bluetooth

 signals:

- When walls, metal, human bodies, or other obstacles exist between the 

Bluetooth

 device and the connected device.

- When equipment that uses 2.4 GHz frequency signals (wireless LANs, 

wireless phones, microwave ovens, etc.) is placed near the devices being used.

- When using a 

Bluetooth

 device (TV, laptop, etc.) other than the mobile 

phone, the sound quality may be affected by the specifications and 

performance of the device.

3. Potentially explosive atmosphere

Turn off your electronic device when in any area with a potentially 

explosive atmosphere. Although this is uncommon, your electronic device 

could generate sparks. Sparks in such areas could cause an explosion 

or fire resulting in bodily injury or even death. Areas with a potentially 

explosive atmosphere are often but not always clearly marked.

4. Battery information

A rechargeable battery has a long service life if treated properly. A new 

battery or one that has not been used for a long period of time could have 

reduced capacity the first few times it is used. Do not expose the battery to 

extreme temperatures, never above +50°C or below -10°C. For maximum 

battery capacity, use the battery at room temperature. If the battery is 

used in low temperatures, the battery capacity will be reduced. The battery 

can only be charged in temperatures between 0°C and +45°C.

5. Recycling the battery in your 

Bluetooth

 Headset

The battery in your 

Bluetooth

 Headset must be disposed of properly and 

should never be placed in municipal waste.

6. Conditions

- The warranty is valid only if the original receipt issued to the original 

purchaser by the dealer, specifying the date of purchase and serial 

number, is presented with the product to be repaired or replaced. 

LG Electronics reserves the right to refuse warranty service if this 

information has been removed or changed after the original purchase of 

the product from the dealer.

- If LG Electronics repairs or replaces the product, the repaired or 

replaced product shall be warranted for the remaining time of the 

original warranty period or for ninety (90) days from the date of 

repair, whichever is longer. Repair or replacement may involve the 

use of functionally equivalent reconditioned units. Replaced parts or 

components will become the property of LG Electronics.

- This Warranty does not cover any failure of the product due to normal 

wear and tear, or due to misuse, including but not limited to use in other 

than the normal and customary manner, in accordance with instructions 

for use and maintenance of the product. Nor does this warranty cover 

any failure of the product due to accident, modification or adjustment, 

acts of God or damage resulting from liquid.

- This warranty does not cover product failures due to improper repair 

installations, modifications or service performed by a non-LG Electronics 

authorized person. Tampering with any of the seals on the product will 

void the warranty.

Limited Warranty

Subject to the conditions of this Limited Warranty, LG Electronics warrants 

this product to be free from defects in design, material, and workmanship at 

the time of its original purchase by a consumer, and for a subsequent period 

of one (1) year. Should your product need warranty service, please return it to 

the dealer from whom it was purchased or contact your local LG Electronics 

contact center to get further information.

Important Safety Information

Avoiding hearing damage

Permanent hearing loss may occur if you use your headset at a high volume.

Set the volume to a safe level. Over time you can become accustomed to a 

higher volume that may sound normal but can be damaging to your hearing.

If you experience ringing in your ears or muffled speech, stop listening and 

have your hearing checked. The louder the volume, the less time that is 

required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
•  Limit the amount of time you use the headset at a high volume.
•  Avoid turning up the volume to block out noisy surroundings.
•  Turn the volume down if you can’t hear people speaking 

near you.

Using headsets safely

Use of headsets to listen to music while operating a vehicle is not 

recommended and is illegal in some areas. Be careful and attentive while 

driving. Stop using this device if you find it disruptive or distracting while 

operating any type of vehicle or performing any other activity that requires 

your full attention.

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source 

licenses that have the obligations to disclose source code, that is contained 

in this product, and to access all referred license terms, copyright notices 

and other relevant documents please visit https://opensource.lge.com.

LG Electronics will also provide open source code to you on CD-ROM for a 

charge covering the cost of performing such distribution (such as the cost of 

media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid to anyone in receipt of this information for a period of 

three years after our last shipment of this produc

t.

RISK GROUP 2

CAUTION : 

UV EMITTED FROM THIS PRODUCT. 

EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE. 

USE APPROPRIATE SHIELDING.

WARNING : 

IF YOU DON’T DO CHARGING OR IF 

YOU OPEN THE CHARGING CASE, THE UVNANO 

FUNCTION IS NOT ACTIVATED.

Customer Information Center

Symbols

~

Refers to alternating current (AC).

0

Refers to direct current (DC).
Refers to class II equipment.

1

Refers to stand-by.

!

Refers to “ON” (power).
Refers to dangerous voltage.

The complete manual is available for download from the LG Electronics website.

  www.lg.com > support or service > Manuals & Downloads > Manuals

 

NOTE

Summary of Contents for TONE-FP8

































Reviews: