LG UQ9100 Series, Owner'S Manual

12

The descriptions in this manual are based on the buttons on the remote 
control. Please read this manual carefully and use the TV correctly.
(Some buttons and services may not be provided depending on models 
or regions.)

How to register the Magic Remote Control

To use the Magic Remote, first pair it with your TV.
1  Put batteries into the Magic Remote and turn the TV on.
2  Point the Magic Remote at your TV and press the 

 Wheel (OK)

 on 

the remote control.

*  If the TV fails to register the Magic Remote, try again after turning the 

TV off and back on.

How to deregister the Magic Remote Control

Press the   

(Back)

 and   

(Home)

 buttons at the same time, for five 

seconds, to unpair the Magic Remote with your TV.
*  Press and hold the   

(Home)

 and   

(Q. Settings)

 buttons for 

more than 5 seconds to disconnect and re-register the Magic Remote 
at the same time.

•

It is recommended that an Access Point (AP) be located more than 
0.2 m away from the TV. If the AP is installed closer than 0.2 m, the 
Magic remote control may not perform as expected due to frequency 
interference.

Connecting Smart Devices using NFC Tagging

NFC is technology that uses Near Field Communication (13.56 MHz), 
allowing you to conveniently send and receive information without 
separate settings. By bringing a smart device near the NFC-enabled 
remote control, you can install the LG ThinQ app and connect the device 
to the TV.

1  Turn on NFC in the smart device’s settings. To use NFC with Android 

devices, set the NFC option to enable ‘read/write tags’ in the smart 
device's settings. The NFC settings may vary depending on the device.

2  Bring the smart device near the   (NFC) on the remote control. The 

required distance for NFC tagging is about 1 cm.

3  Follow the instructions to install the LG ThinQ app on your smart 

device.

4  Retagging the smart device to the remote control allows you to 

conveniently access various features on the connected TV through the 
LG ThinQ app.

 Note

•

This feature is available for NFC-enabled smart devices only.

•

This feature is only available if the remote control has an NFC logo.

Specifications

Specifications (MR22GN, MR22GA)

Frequency range

Output Power (Max.)

Bluetooth

2,400 to 2,483.5 MHz

7 dBm

NFC

*

13.553 to 13.567 MHz

-13.27 dBuA/m @ 10 m

*  Only MR22GN