1.Paste the microfiber cloth after it wrapped in the microfiber cloth board.
When the nylon fastening of microfiber cloth is fix to the nylon fastening of mop board,
the microfiber cloth is fixed.
2.Push the top of nozzle after microfiber cloth fix to the microfiber cloth board .
*When heard the “click” the microfiber cloth is fixed to the board completely .
3. In the process of cleaning, One side of microfiber cloth is dirty, you can disassembling the mop from mop
board by push the treadle then you can continue using after change another side of mop.
Reverse
side
White nylon
fastening
* Microfiber cloth board can
be used both sides.
Nozzle
Nylon fastening
Microfiber cloth
Microfiber cloth
Microfiber cloth Board
Microfiber cloth Board
Nylon fastening
Microfiber cloth
Microfiber cloth Board
e
Using the Mop and Mop Nozzle
Using the Mop
Using the Mop Nozzle
When using the mop nozzle, please dry it first.
Always using special mop of LG.
Attach the mop to the bottom of the nozzle with the white
surface upturned.
When drying the mop in washing machine, set it to the weakest
mode.
When using the Mop Nozzle without mop, the mop board both sides can be fixed to use,
the assembly method as shown in the right
NOTE:
It will be electrical danger when using the mop with excess moisture, and will be harmful to
the cleaner.
The mop can not be fixed when it deviates from the fixing place.
Mind that do not block the dust suction inlet when fixing the mop.
Depending on different condition, connect or disconnect the mop.
Connecting method
21
e
Summary of Contents for VC3316GHTMY
