Please check before notifying malfunction
23
Check before reporting the trouble
Possible Cause
Possible Solution
①
The inlet or dust bin is
blocked by a big foreign
object
②
The filters are dirty.
①
Remove the object with sticks, etc.
②
Clean the filter
①
Plug into the socket properly.
②
Operation under the guide of
Manual
③
Make sure the power on of socket
①
Clean the filter, dust bin and
remove the items that cause clogging
firstly, then it can be used normally
when the protection device is
released after about 40 minutes.
②
Press the switch again or plug and
press the switch again to let the
power on
③
It is the character of this product,
just use it normally.
①
The power cord plug is
not plugged in the socket
properly.
②
Wrong operation
procedure of each function
③
Socket no power
①
This product has inlet
motor overheat
prevention device, and it
may stop temporarily
when the following cases
occur.
– If it is used when dust
and wastes are full in
dust bin and filters.
– If it is used with the
inlet blocked
– If the product is used
excessively for a long
time
②
When touch switch
was operated by other
touches
③
If handle of the main
body is released during
the operation, if 3
seconds pass, the
operation automatically
stops, and after about 1
minute, it converts to
standby state.
Cleaner stops
suddenly
Cleaner does not
work at all
Inhaling gets
weakened and
vibrating sound is
heard
Summary of Contents for VH9001DS
