6
IMPORTANT SAFETY INSTRUCTIONS
• Do not use this cleaner on anything other than
AC 220 V.
It may cause fire.
• If the product is not in use for a long period of time,
pull out the power plug.
Water may permeate or dust accumulated to cause
electrical shock or short circuit fire by heat or fire.
• Electrostatic may be generated at main body
during the cleaning.
Cleaner may malfunction due to electrostatic, so pull
out the power cord and put it back in again.
• Big objects such as socks, stocking, box tissue,
etc., may block the inlet during the cleaning, so
please remove them before starting the cleaning.
Cleaner shall be used to remove dust only.
• Do not place anything else on the main body
station other than main body.
Especially, metal or magnets cause product disorder.
• Do not stop at one spot or use it on the same spot
repeatedly for a long time.
The bedding may be damaged by the vibration.
• Separate the inlet cover, and do not use it for
anything else(massage, etc.) than cleaning.
You may have product damage or light scratch.
• Do not touch the bottom surface with hand or foot
during the vibration operation.
You may get a light scratch.
• Make sure to combine the cover to dust bin before
the usage, and when it is filled up to the dust bin
MAX line, empty the dust bin.
If it is used continuously while dust bin is full, it causes
disorder.
• When you pull out the plug, make sure to hold the
plug.
If you hold the cord, part of the core line may be broken
to cause heat and fire.
• If a foreign object is attached to the bottom surface
of dust bin, remove it before using the product.
Cleaner inhaling may not work properly.
• Make sure to combine the bottom plate and use
during the cleaning of the bedding, and do not use
it on a solid surface.
If the bottom plate is not installed and used, by the
vibration, and according to the floor material, noise may
occur, and it may be deformed.
• Use it only on beddings such as blanket, mattress,
pillows, or cloth sofa.
The floor may be damaged by the vibration.
Thermal protector :
In the LGE Bedding Cleaner, there is a safety function called 'main body protection device' to stop the
operation of the cleaner automatically to prevent overheating of the motor, and it is operated for the following
cases.
– When dust is full in dust bin or it is continued to operate with inlet blocked.
– If it is continued to operate without washing the dust bin
– If it is repeatedly used for long time
If the operation stops by main body protection device operation, after pulling out the power plug from the
power socket,
– Empty the dust bin and remove foreign object blocking the inlet.
– Clean the dust filter.
※ After about 40 min., main body protection device is released, so it can be used again.
(The waiting time becomes different for the surrounding temperature.)
If the same phenomenon occurs after treatment, call the service center.
CAUTION
