-5-
DISASSEMBLY
• Almost all of the parts of this vacuum cleaner can be
disassembled with a screw driver and each
connecting component easily fits each other.
Disassemble one by one referring to the exploded view.
• If possible, don't disassemble except for the
necessary parts. It is not necessary to disassemble
the parts that are not detailed in the exploded view.
1. Body Cover Assembly Replacement
1) Remove the dust tank from the set.
Remove the five screws fastening the sub cover.
2) Remove the one screws fastening the body base.
3) Disassemble the body cover, raising the body cover.
Pull out the two lead wire housing.
2. Motor Assembly Replacement
1) Remove the four screws fastening the motor cover.
2) Unlock the two hooks.
3) Pull out the motor and disconnect the lead wires
from it.
NOTE :
Before attempting to service or adjust any part of the vacuum cleaner, disconnect the electrical power
supply cord from the wall outlet.
Motor
Summary of Contents for VK9820SCAY
Page 11: ... 11 CIRCUIT DIAGRAM ...
Page 21: ......
