background image

4

ENGLISH

BEFORE INSTALLATION

• 

Do not use this product for purposes other than to install the Companion Box (AV box) in a designated location.

• 

When installing/using the wall mount, be cautious of product damage and avoid accidents.

• 

Install the wall mount according to the installation manual.

• 

If you have not fully read and understood the installation manual, do not install the product and contact the 

dealer to have a specialized installer install the product for you.

• 

Even if you are not a specialized installer, it is advantageous to have experience in mechanical or construction 

field in completely understanding this manual and installing the product.

• 

It is recommended that you install this product on a concrete wall or wooden pillar. If installing on other 

materials (plywood, MDF, bricks), ensure that you consult a qualified professional.

• 

Install the product only on a vertical wall 

Note : Do not install on walls slanted at an angle outside the normal range or on severely tilted walls. 

The manufacturer is not responsible for issues from installing the product on an angled wall or on the ceiling.

• 

Check that the accessories provided with the product are all included before installing. LG Electronics is not 

liable for any damage or loss of accessories after the package has been opened.

• 

Keep the included accessories out of reach of babies or children as it can cause safety issues including 

suffocation from swallowing the parts.

• 

Make sure screws are tight against the wall, but do not overtighten.
Note : Applying excessive force to screws may damage to the wall, affect the product performance, or cause 

the product to become damaged.

• 

Be careful not to install a TV that exceeds the weight restrictions of the wall mount.

• 

Be careful with the tools used during installation to prevent accidents or damage.

Tools you will need

#2 Phillips head screwdriver (manual or electric) / Level / Stud finder / Drill / Ø 8 mm drill bit for concrete or Ø 4 

mm drill bit for steel.

Summary of Contents for W7AWB

















Reviews: