background image

8

ENGLISH

_inde

x

ENGLISH

_inde

x

How to install

 

-

The appearance of tools may differ 

from the enclosed images.

 

-

Always consult a professional 

when installing a wall mount.

1

  Wearing gloves

2

 

How to fix anchors and screws

Please make sure that:

 

-

Check that the material and 

thickness of the wall and finishing 

material comply with the 

installation manual. Before 

beginning the mounting process, 

you must be sure the wall is able 

to support the weight of the TV. 

 

-

Should use the enclosed anchors 

and screws on crack-free concrete 

walls. 

 

-

Never install the product on a 

plasterboard or wall made of paper 

or medium-density fiberboard 

(MDF). When it is necessary to 

install the product on such wall, 

anchor screws must be fastened 

to retaining walls (concrete) or 

wood Stud inside the finishing 

material.

 

-

The wall mount should be attached 

to a stud. This usually will not be a 

problem, but depending on 

individual circumstances, there 

may be cases when the ability to 

mount into a stud is not possible. 

In this case, there are a variety of 

drywall anchors, such as toggle 

bolts, which may provide a 

solution. If using drywall anchors, 

please be sure the anchors and the 

wall have the ability to support the 

weight of your TV. Please note that 

the supplied anchors may not be 

the correct ones for your individual 

situation, so you should check with 

a local professional.

Summary of Contents for WB21EB





















Reviews: