background image

4

ENGLISH

_inde

x

Do not install the product near a fire sprinkler 

or detector, a place where vibration or shock 

may occur or near a high-voltage wire or power 

source.
Unplug the product’s power cord from the wall 

outlet before installing.

Installing the product while the power cord is 

plugged in may result in electric shock or fire.

Do not install the product with bare hands. Be 

sure to wear work gloves.

Attempting installation without work gloves may 

cause personal injury.

Connect the product with the supplied cable. 

Use of an unauthorized cable may result in 

damage by friction with the wall. Make sure to 

use the supplied cable gender. 

(This may vary by 

model.)

Before Installation

•  Do not use the product for any purpose other than 

installing the TV on a wall.

•  Avoid product damage and safety accidents caused 

by careless installing or use of improper or unauthor-

ized wall mount.

•  Follow the instructions in the installation manual for 

a convenient installation of the wall mount.

•  Immediately discontinue installation and contact 

the service center if you cannot fully understand the 

installation process. 

Use a professional installer if any installation issues 

remain after the inquiry.

•  Installation of this product on a concrete wall or 

wood stud is recommended. Installation on walls 

made of other types of plasterboard, plywood, brick, 

etc., is not recommended since there is a greater 

chance the product will fall.

•  When installing the Full Contact Wall Mount, the TV 

may not be contacted firmly against the wall due to 

some wall conditions.

•  Install the product only on a vertical wall.  

Do not install on a tilted wall that exceeds building 

standards or on the heavily titled wall or ceiling.  

LG is not responsible for problems caused by improp-

er installation of the product, e.g., heavily tilted walls 

and ceilings. 

•  Check the enclosed accessories before installation. 

We are not responsible for any lost or damaged 

accessories after the inner packaging is opened.

•  When an infant or small child swallows the enclosed 

accessories, various safety accidents such as choking 

may occur. Keep the enclosed accessories out of the 

reach of infants and children.

•  When tightening screws, tighten until fully snug. 

Avoid using excessive force when tightening the 

screws. Doing so may damage the wall and product 

or reduce the rigidity or performance of the product.

•  Avoid installing a TV that exceeds the specified 

tensile load, and do not allow any external force to 

be applied to the product.

•  Avoid accidents by using work tools with care during 

installation.

•  After installing the product, ensure its use in close 

contact with a wall.  

If the product is not positioned against a wall, the 

product may be unstable or damaged.

Tools for Installation

 - “+” shaped screwdriver (manual or electric)

 - level

 - drill

 - Ø 8 mm drill bit for concrete or Ø 4 mm drill bit for 

steel

Summary of Contents for WB21LMB





























Reviews: