14
Check before using
Make sure to check before use!
Open the Tap water Valve
When the Display' s indicator light is turned off
When the product is not used for a Long time (ex. 2~3 days)
After the installation
Periodical change of filter
How to drain hot water
The product operates when Tap water is supplied.
When the Display' s indicator light is turned off, check if the power supply is stopped by
power outage or other causes.
If water has been kept in the tank or hasn' t been used for a long time then drain the
water completely.
Do one more time of draining with newly purified water then use.
Throw away the water stored to the full level in the inside tank for more than once
before use.
Filter changing is very important for clean water.
Do not miss the time for filter replacement, since old filter can' t function well.
Take off the cap of the hot water drainer on the side of the product, and connect it with
a drain hose.
(Please be careful not to be scalded by hot water)
Notice
If the product is not used for a long time,
then please unplug and fasten
the valve of Tap water.
CAUTION
* this product is 230V~ 50Hz use
only.
- Please use earth - connected
socket when pluging in.
- Power is required for the operation
of water purifier.
Summary of Contents for WCD74GJ1P
Page 28: ...28 Memo ...
Page 29: ...29 Memo ...
Page 30: ...30 Memo ...
Page 36: ...Made in Korea ...