1
2
3
B
A
C
1
2
1
2
3
4
5
6
3 sec.
INSERT PLUS INTO THE MAINS SOCKET
Never touch the plug with wet hands!
Never remove the plug from the
socket by pulling on the cord.
POSITION DRAIN HOSE.
Position Drain hose as per the installation
instructions in this manual
WATER CONNECTION
Turn on the water tap
CHECKING THE MACHINE
Never use a defective machine! In case of any
failure, first unplug the machine and turn off the
water tap.
PREPARING LAUNDRY AND USING MACHINE
WITH CARE
- empty all pockets
- remove all metal parts
- place the delicate textiles into the laundry net
- close zippers
DRUM CARE
- remove extraneous objects
- leave door open to dry the drum when not
in use.
- check the rubber seals regularly
ECOLOGICAL WASHING
- make use of the max. washing quantity
- Please note the washing capacities for each
cycle as mentioned in the Washing program
table.
- do not “pre wash” if possible
- use short program if possible
LAUNDRY WITH DIFFERENT AMOUNTS OF
SOILING
- wash new textiles separately
- do not prewash
- pretreat dirty spots
- pre wash
Sort the laundry
note washing instruction symbols -
Degree of soiling -
Type of textile / colour -
Loading the Drum
Check the folds of the flexible gasket (grey) -
and remove any small articles or foreign objects that
may have fallen from items in the previous wash.
.
Check all garments for loose items before loading
and ensure that clothes are clear of the door gasket
before closing the door so that the clothes or door
gasket are not damaged during the wash.
Fill detergent
Refer to the
written information
on the detergent's packaging
Turn the machine ON
by pressing the Power button
Select a
Program
Select the
Dry mode
Select an
Option
Pre Wash / Rinse+Spin / Rinse+ / Hold
Select
Spinning speed
and
Washing temperature
4 additional programs
Time Delay / Steam Wash / Intensive / Medic Rinse
Press Start / Pause to start or
pause the washing process
Turn off tap
- close water supply
- clean the machine
- unplug machine
Additional Steps
- Turn the machine off
- leave door open to
allow drum to dry
Remove laundry
- open the door
- remove the laundry
B
Main Wash
For Laundry requiring detergent, place
recommended dosage in to this compart-
ment. Please note that liquid detergent will
enter the tub as it is poured and may not be
suitable for a delay start.
C
Softener
Do not exceed the MAX-Level.
Highly densed softeners are to be
diluted with some water.
Excessive softener can cause brown
or grey spotting on the clothes.
A
Pre Wash
The Pre wash compartment can be used
for Normal to heavy soiled clothes, by add-
ing a prewash or normal detergent to this
compartment before selecting this wash
option with the Cycle.
Dry fl at
Do not bleach
OK. to bleach
Do not tumble dry
Hang to dry
Drip dry
Medium hot ironing
Hot ironing
Do not iron
Washing temperature
Do not wash
Luke warm ironing
Time Delay
Allows you to set the cycle's ending time (by hourly increments) in advance.
How to set “Time Delay”
- Press
Power
button.
- Turn the
Program
dial to select the program you require.
- Press
Time Delay
button and set the finishing time. The machine will then automatically work out
the turn on time based on the chosen cycle.
- Press the
Start/Pause
button.
Intensive
If the laundry is heavily soiled “Intensive”option is effective.
- By selecting the Intensive option, the washing duration may be extended, d epending on the program
selected.
- To use this option, press the intensive button once before the wash program is started.
Medic Rinse
For best results or for cleaner rinsing, select the “Medic Rinse” option.
This allows the final rinse to be heated to 40 degrees.
Available in the Cotton, Cotton Quick, Synthetic and Baby Care programs.
Medic Rinse is set by default in the Baby Care program.
The respective temperature indicator will light up.
Steam Washing and Refresh cycle
Steam Wash is
- For heavily stained clothes, underwear, or baby clothes.
- Steam Wash is available with the Cotton, Cotton Quick, Synthetic, Baby Care, Allergy Care programs.
- The Refresh cycle is for reducing /removing creases and wrinkles without washing. Detergent must
not be used in this Cycle.
- Do not load delicates such as wool, silk, and easily discolored clothes.
Program
Temperature
Program
Temperature
Cotton
Cold, 30°C, 40°C, 60°C, 95°C
Baby Care
40°C, 60°C, 95°C
Cotton Quick
Cold, 30°C, 40°C, 60°C
Refresh
No choose
Synthetic
Cold, 30°C, 40°C, 60°C
Allergy Care 60°C
How to use Refresh Cycle
Drying cycle
Temperature
Spin
Options
Start / Pause
Program Cycle
Power button
Drum
Dispenser
drawer
Filter cover.
Control panel
Washing program table
Additional programs
Preparation
lightly
heavily
Washing symbols
Dispenser drawer
Display
Additional programs
Water Temperature:
Select water temperature to suit wash cycles. Always follow garment manufacture’s care label or instructions when washing.
Intensive:
If the laundry is heavily soiled “Intensive” option is effective.
Pre Wash:
If the laundry is heavily soiled, “Pre Wash” Cotton is recommended. Pre Wash is available in the Cotton, Cotton Quick, Synthetic and Baby Care program.
Rinse+:
Used to introduce an additional rinse, which may assist in removing traces of detergent residue.
Medic Rinse:
For best results or for cleaner rinsing, you can choose Medic Rinse option. this heated Rinse is automatically selected on Baby Care program.
The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the
products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine M0806.
Notes:
Neutral detergent is recommended. The wool cycle features gentle tumbling and low-speed spin for garment care.
Warning:
Keep all washing powder and detergents away from children. Danger of poisoning
• This washer-dryer s automatical process from washing to drying can be selected easily.
• For most even drying, make sure all articles in the clothes load are similar in material and thickness.
• Do not overload dryer by stuffi ng too many articles into drum. Items must be able to tumble freely.
• If you open door and remove load before dryer has fi nished its cycle, remember to press the Start/
Pause button.
• By pressing the DRY button, you can select.
• After the end of dry, “ ” is displayed. By pressing the Start/Pause button the program can be ended. If you not
press the Start/Pause button, the program is ended after about 4 hours. “ ” Cooling Cycle.
1.Drying Automatic guide
• Use your Automatic Cycles to dry most loads. Electronic sensors measures the temperature of the exhaust to
increase or decrease drying temperatures for faster reaction time and tighter temperature control.
• Recommand Automatic drying course for clothes type.
Note:
The estimated drying time varies from the actual drying time with an Automatic.
The type of fabric, size of the load, and the dryness selected, do affect the drying times.
Note:
The last 6 minutes of drying time, A sensor(Thermistor) detects clothes drying conditions.
When the dryness is low, cycle time will be added by max. 30 mins with "6" mins remaining window display.
2.Drying time guide
• By press the Dry button, the drying time can be selected.
• Drying course can last up to 150 min. When selecting drying only, drying course will start after spining.
(The spinning time is about 19~22 min.)
• These drying times are given as a guide to help you set your dryer for manual drying. Drying times can vary greatly
depending on dampness, room temperature and type of fabric and your own experience will be your best guide.
Woolen Articles
- Do not tumble dry woolen articles. Pull them to their
original shape and dry them flat.
Woven and Loopknit Materials
- Some woven and loopknit materials may shrinks, by
varying amounts, depending on their quality.
- Always stretch them out immediately after drying.
Permanent Press and Synthetics
- Do not overload your dryer
- Take out permanent press articles as soon as the
dryer stops to reduce wrinkles.
Fiber or Leather Materials
- Always check the manufacture s instructions.
Baby clothes and Night Gowns
- Always check the manufacture s instructions.
Rubber and Plastics
- Do not dry any items made from or containing rubber
or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
Fiber glass
- Do not dry fiberglass articles in your dryer. Glass
particles left in the dryer could be picked up by your
clothes the next time you use the dryer and irri tate
your skin.
Dry
To activate:
press and hold
the Option but-
tons simultane-
ously until " "
appears in the
display.
To deactivate:
press and hold
the Option but-
tons simulta-
neously for 3
seconds until the
" " is removed
from the display.
Change to the desired program, whilst in child lock mode:
Empty the drum
completly and
close the door
Add anti-limescale
(Calgon) to the main
wash compartment.
Close the disp. drawer
Power ON with
Then press and
hold Spin and
Temp. button
Press the
Start/Pause
button to start Tub
Clean process
After the cycle is
complete, leave
the door open
to dry
Select this function to lock the buttons on the control panel and to prevent tampering.
Press and hold
the Option but-
tons simultane-
ously
Press
Start/
Pause
Select the desired
program
Press
Start/Pause
6
3 sec.
6
3 sec.
The Beep on/off function can be set only during the
washing cycle.
To set the Beep On/Off function follow the below steps.
1. Turn on the washing machine (by pressing the
Power
button).
2. Press the
Start/Pause
button.
3. Press and hold the
Option
and
Spin
button simulta-
neously for three seconds to set Beep on/off
function.
Once the Beep on/off function is set, the setting is
memorized even after Power is off.
Child Lock
6
3 sec.
TUB CLEAN is special cycle to clean the inside of the washing machine.
A higher water level is used in this cyle at higher spin speed.
Perform this cycle regularly.
Tub Clean
Beep on / off
Select the Refresh
program
Load 3 items or less
and close the door
Press the Steam Wash button repeatedly until
the required and correct number of items is
displayed.
Do not use detergents or softener in the
Refresh cycle.
Press the
Start/Pause
button
2
4
3
1
Note:
To use programs in the Steam-Cycle,
please press first the “Steam Wash”
button (see additional programs)
.
Cold water tap must be left on during drying cycles.
a) Low Temp. : For Synthetics select
b) Iron Dry : If you want to iron clothes
c) Cupboard Dry : For Cottons select
d) Eco Dry : A special cycle to reduce water usage during the dry cycle.
e) Time (30/60/120 minutes) - 30 min : Cotton 1.5 kg
- 60 min : Cotton 3 kg
- 120 min : Towel 5 kg
Refresh Allergy Care
Baby Care
Cotton
Synthetic
Cotton Quick
Steam Cycle
Steam Washing features enhance washing performance with low
energy consumption. Refresh cycle reduces creases in clothes.
By pressing the Steam Wash button, Steam Function can be selected.
When Steam Function is selected, Steam wash ( ) LED lights up.
Program
Fabric Type
Water Temp.
(Option)
Dry (Option)
Maximum Load
Cotton
Cotton
Quick
Synthetic
Baby Care
Allergy Care
Delicate
Quick 30
Refresh
Color fast garments (shirts,
nightdresses, pajamas...)and
lightly soiled white cotton
(underwear)
Lightly soiled clothing and
small loads
Polyamide, Acrylic, Polyester
Lightly soiled baby wear
Cotton, underwear, pillow
covers, bed sheets,
baby wear
Delicate laundry easily
damaged
“Hand wash” marked delicate
and wool laundry
Colored laundry which is
lightly soiled fast
Cotton mixed, Polyester
mixed Dress shirts, blouses
40°C
(Cold, 30°C,
60°C, 95°C)
40°C (Cold,
30°C, 60°C)
60°C
(40°C, 95°C)
60°C
30°C
(Cold, 40°C)
40°C
(Cold, 30°C)
No Choose
- Time Delay
- Steam Wash
- Intensive
- Medic Rinse
- Pre Wash
- Rinse+Spin
- Rinse+
- Hold
- Time Delay
- Intensive
- Rinse+Spin
- Rinse+
- Hold
Option
- Low Temp.
- Iron Dry
- Cupboard Dry
- Eco Dry
- Time
–
Rating
Wash: Less than 7 Kg
Dryer: 5Kg
Wash: Less than 4.5Kg
Dryer: 4.5Kg
Less than 2.0kg
- Time Delay
- Steam Default
- Intensive
- Medic Rinse
- Rinse+Spin
- Rinse+
- Hold
30°C
(Cold, 40°C)
- Steam Default
Less than 3.0kg
Up to 3 Items.
Hand Wash
/Wool
Cupboard Dry
Eco Dry
30
Low Temp.
Iron Dry
3.Completion of Drying
• When drying cycle is completed, “ ”[Cool Down] is displayed on the Multi display.
• The Cool Down is setting automatically when a drying cycle is complete.
• When you are not remove a loaf of clothes from the dryer as soon as it stops, wrinkles can form.
• The Cool Down operating periodically tumbles, rearranges and fl uffs the load to avoid wrinkles without heat for up to
4 hours.
• The message will continue to display until the clothes are removed or the Start/Pause button is pressed.
60
120
