LG WD205C Series, Service Manual

5

3. HOW TO USE

CONTROL PANEL FEATURES

A

POWER (ON/OFF) BUTTON

Press to turn the washer ON. Press again to 
turn the washer OFF. Pressing the POWER 
button during a cycle will cancel that cycle 
and any load settings will be lost. The drawer 
will unlock after a brief pause. 

NOTE:

• If there is any water remaining in the tub

after the washer shuts off, it will drain
following 4-minutes delay. The washer
can be restarted any time before the drain
begins. However, once the water begins to
drain, all functions will be suspended until
the water has been completely drained
and the washer shuts off.

• When the Power button is pressed, the

Normal cycle is selected by default. To
modify the default options or choose
another cycle, press the cycle selector (v)
button to illuminate the display.

B

CYCLE SELECTOR BUTTON

Press this button to select the desired cycle. 
Once the desired cycle has been selected, 
the standard presets will appear in the 
display. These settings can be  adjusted 
using the cycle setting buttons any time 

before starting the cycle.

NOTE:

 To protect your clothing, not all 

settings are available on all cycle selections.

C

START/PAUSE BUTTON

Press this button to start the selected cycle. 
If the washer is running, use this button to 
pause the cycle without losing the current 
settings.

NOTE:

 If you do not press the START/PAUSE 

button within 4 minutes of selecting a cycle, 
the washer automatically turns OFF and all 
cycle settings are lost. Any water remaining 
in the tub will be drained.

D

OPTION BUTTONS

Use these buttons to adjust the settings for 
the selected cycle. The setting lights above 
the buttons illuminate to show the current 
selection.

E

TIME AND STATUS DISPLAY

The display shows the cycle status and 
estimated time remaining.

F

REMOTE CONTROL SENSOR

Use the remote to set the controls without 
bending down to reach the control panel.

A

B

C

D

E

F

LGE Internal Use Only

Copyright © 201

6

 ~ 201

7

 LG Electronics Inc. All rights 

reserved. Only training and service purposes.