20
3-4. W ASHING PROGRAMS
Washing
Programs
Add
the laundry
Add
the detergent
Fuzzy Washing
(Normal Wash)
Used for normal loads, this mode
automatically selects the most
appropriate conditions and
completes the sequence in one
operation. The built-in sensor
detects the size of the load and the
ideal wash power and wash, rinse
and spin times are set accordingly
Economy Wash
Use this mode when washing
lightly soiled clothes for a short
time. The weight should be under
2.0kg.
Jean Wash
Use jeans program when washing
heavy, thick, and extremely dirty
laundry such as jeans and work
outfits.
Turbo(Soak) Wash
Use this mode for washing
excessively dirty laundry by soaking
in water for some time to remove
proteins and fats. ‘TURBO(SOAK)’
mode can be used with all washing
programs simultaneously except for
“WOOL & ECONOMY” program.
Select the
ECONOMY
program on
the Control
panel.
Add the appropriate
quantity of deterge nt as
indicated by the water
level next to WATER-
DETERGENT.
Or follow the detergent
manufacturer’s
instructions
Select the
JEAN
program on
the Control
panel.
Select the
WOOL
program on
the Control
panel.
The TURBO
(SOAK) will not
work in WOOL &
ECONOMY
Program.
Keep pressing the PROCESS button until the TURBO/SOAK light is on and
then WASH, RINSE, SPIN lights are on simultaneously.
If necessary, select the desired washing process from
(TURBO/SOAK+WASH+RINSE+SPIN), (TURBO/SOAK+WASH+
RINSE), (TURBO/SOAK+WASH) manually.
Wool Wash
Use this program for washing
delicate fabrics such as lingerie and
woolens.
(wash only “water washable” clothes)
Before washing your woolens check
the care label for the washing
instructions.(wash only water
washable clothes)
Use neutral detergent
appropriate for the
laundry.
When washing
woolens use a mild
detergent
recommended for
washing wool.
AUTO OFF
21
Close the lid
Finish
Caution & Note
The pulsator rotates for 8 seconds
to detect the laundry load.
Then the water level and the
amount of detergent to be used
will be shown and water will be
supplied.
Water will be supplied
for 2 minutes after the
start of the wash to
supplement the water
the laundry has
absorbed.
When the wash
program ends, the
buzzer will ring for 10
seconds before the
Power goes off
automatically.
If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the water level.
With lightweight bulky loads, water level
can be set low.
Changes to water temperature (hot/cold)
and wash level are possible during
operation.
The water level and the
amount of detergent to be
used will be shown and
water will be supplied.
When setting the water level manually,
do not set to MEDIUM to prevent
damage to laundry.
Washing with hot water may damage
the laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.
Turbo(Soak)/ Wash cannot be selected
for the Wool Wash program.
