background image

USING THE DISPENSER

ENGLISH

1 1

The automatic dispenser consists of four compartments which hold 1) liquid chlorine bleach, 2) liquid fabric
softener, 3) liquid or powdered detergent for prewash and 4) liquid or powdered detergent 
and color safe bleach for main wash.
All laundry products can be added at once in their respective dispenser compartments. 
They will be dispensed at the appropriate time for most effective cleaning. After loading the laundry 
additives into the dispenser, close the dispenser drawer. 

Add detergent, bleach and fabric softener to the automatic dispenser following these steps: 

1. Open the dispenser drawer. 

2. Load the laundry products into the appropriate compartments.

3. Close the dispenser drawer.

¡Æ

About detergent

Low sudsing detergent is recommended for this washer. Use the manufacturer's recommended amount. 
If low sudsing detergent is not available, a reduced amount of regular detergent may be used. 
Because reducing the amount of detergent may reduce cleaning, it is important to pretreat stains, 
sort carefully by color and soil level, and avoid overloading. 
Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load. 
For best results, avoid using too much detergent. 

NOTE : Liquid detergent will drain into the washer drum as it is added. 

• Add detergent to this compartment when using

the Prewash option. Liquid or powdered
detergent may be used in this compartment. The
detergent will automatically be dispensed during
Prewash if the Prewash option is selected.

• Add 1/2 the recommended amount of detergent

to the Prewash compartment and the
recommended amount of detergent to the main
wash compartment. 

1. Prewash Detergent Compartment

Liquid Chlorine 
Bleach
Compartment

Liquid Fabric
Softener
Compartment

Prewash 
Compartment

Main Wash 
Compartment

Summary of Contents for WM2277HW

























Reviews: