APPENDIX
96
APPENDIX
1
12
2.. O
OSSD
D SSeelleecctt ((C
Coom
mm
maanndd:: kk ll))
To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
1
13
3.. RReem
moottee C
Coonnttrrooll LLoocckk M
Mooddee ((C
Coom
mm
maanndd:: kk m
m))
To lock the remote control and the front panel controls
on the TV.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Data 01: Lock on
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
If you’re not using the remote control and front panel
controls on the TV, use this mode. When main power is
on/off, remote control lock is released.
1
14
4.. TTrreebbllee ((C
Coom
mm
maanndd:: kk rr))
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00
~
Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. See page 97.
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
1
15
5.. BBaassss ((C
Coom
mm
maanndd:: kk ss))
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00
~
Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. See page 97.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
1
16
6.. BBaallaannccee ((C
Coom
mm
maanndd:: kk tt))
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00
~
Max: 64 (*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. See page 97.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
1
17
7.. C
Coolloorr TTeem
mppeerraattuurree ((C
Coom
mm
maanndd:: kk uu))
To adjust color temperature.
You can also adjust color temperature in the PICTURE menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
1
18
8.. IISSM
M M
Meetthhoodd ((C
Coom
mm
maanndd:: jj pp))
To avoid having a fixed image remain on screen.
Transmission
[ j ][p][ ][Set ID][ ][Data][Cr]
Data 01: Inversion
02: Orbiter
04: White Wash
08: Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
1
19
9.. PPoow
weerr ssaavviinngg ((C
Coom
mm
maanndd:: jj qq))
To control the low power function on/off.
Transmission
[ j ][q][ ][Set ID][ ][Data][Cr]
Data 00: Power saving off (Power Saving Level 0)
01: Power saving on (Power Saving Level 4)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
2
20
0.. AAuuttoo C
Coonnffiigguurraattiioonn ((C
Coom
mm
maanndd:: jj uu))
To adjust picture position and minimize image shaking
automatically. Auto configuration only works in RGB-PC
mode.
Transmission
[ j ][u][ ][Set ID][ ][Data][Cr]
Data 1: To set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
2
21
1.. C
Chhaannnneell TTuunniinngg ((C
Coom
mm
maanndd:: m
m aa))
To tune channel to following physical/major/minor number.
Transmission
[m][a][ ][Set ID][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor channel
number. The Physical number is the actual digital channel
number, the Major is the number that the channel should
be mapped to, and the Minor is the sub-channel. Since
the ATSC tuner automatically maps the channel to the
Major number, the Physical number is not required when
sending a command.
Data 00: Physical Channel Number
NTSC air: 02
~
45, NTSC cable: 01, 0E
~
7D
ATSC air: 01
~
45, ATSC cable: 01
~
87
Data 01 & 02: Major Channel Number
Data 01: High byte Data 02: Low byte
Two bytes are available for the Major and Minor, nor-
mally only the second byte is used.
Data 03 & 04: Minor Channel Number
Not needed for NTSC.
Summary of Contents for Z50PG10-UA
Page 100: ......
