background image

Position 0: All power off
Position 1: Power to lights and

smoke generator

Position 2: Power to lights, smoke

generator and motor

Position 3: same as Position 2 

(factory pre-set)

Attention:

Do not connect this model

to other loco models with different
starting characteristics. This can
damage the internal gearing.

Multi-Train System

The model is equipped with a facto-
ry-installed onboard decoder for the
LGB Multi-Train System. It can be
used without modifications on ana-
log or digital layouts. For operation
with the Multi-Train System, the
model is programmed to loco
address 03. For information on pro-
gramming the loco address, see the
instructions for various MTS compo-
nents.

When operating with the Multi-Train
System, you can control the loco’s
functions remotely. Press the light-
ing button (“9” with remotes) to turn
the loco lights on or off. Press func-
tion button 7 to turn the smoke gen-
erator off or on.

When operating with the Multi-Train
System, the loco features a “Back-
EMF” function. This keeps the motor
speed constant (and under normal
conditions the loco speed), even
when the load of the loco changes,
for example, in curves or on grades.
This feature does not work at top
speed, because additional voltage
must be available to overcome any
added load.

If desired, numerous functions of the
onboard decoder, such as accelera-
tion, braking, direction of travel and
many others, can be programmed

using a PC and the 55045 MTS PC
Decoder Programming Module (see

Instructions for advanced users

).

These functions also can be pro-
grammed from the 55015 Universal
Remote.

Lighting

This model features directional light-
ing. The model has a "flat" multi-pur-
pose socket, with a removable cover,
on the rear of the loco (Fig. 3). This
socket can be used to provide track
power to cars with lighting or sound
electronics.
To  remove the cover of the socket,
pull it straight out. If the cover is
tight, gently use a small straight
screwdriver to pry it out. (Do not pull
out the rectangular outer housing.)

Sound

To equip this model with sound, we
recommend the following products:
- 65000 European Steam Sound Unit
- 65011 Sound Unit Power Storage

The 65011 is not needed when oper-
ating with the LGB Multi-Train
System.
If there is not enough space inside
the locomotive or if you prefer not to
disassemble the loco, you can place
the Sound Unit in a freight or pas-
senger car and connect it to the loco-
motive via the multi-purpose socket.

Smoke Generator

This model is equipped with a smoke
generator. A small supply of LGB
Smoke and Cleaning Fluid is included
with this model. For best operation,
fill the generator halfway with fluid. If
the generator is overfilled, it will not
convert the fluid into smoke.

Attention!

Never touch the heating

element in the center of the smoke
generator. It is hot and fragile. Not
for children. Only for use by adults!

13

Summary of Contents for 20271



























Reviews: