10
SERVICE
Lubrication
The axle bearings should be lubricated occasionally with a small amount of Märklin-
Oil (7149).
Replacing Traction Tires
- Loosen two screws on the side frame of the truck and remove the side frames.
- Remove the old traction tire with a small flat screwdriver:
Lift the old traction tire out of the groove in the driving wheel.
- Carefully push the new traction tire over the wheel and into the groove on the wheel.
- Check to make sure that the traction tire is properly seated.
- Put the model back together.
Cleaning
Clean the locomotive only with a soft cloth. Do not use any cleaning agents or abra-
sive cleaners.
General Note to Avoid Electromagnetic Interference:
A permanent, flawless wheel-rail contact is required in order to guarantee operation
for which a model is designed. Do not make any changes to current-conducting parts.
Controllable Functions
Lighting
1
LV + LR
Sound effect: Long Horn
1
Sound 1
Sound effect: Squealing brakes off
2
BS
Sound effect: Short Horn
3
Sound 2
Sound: Greeting announcement
4
Sound 7 / 8
Sound effect: Compressor
5
Sound 11
Sound effect: Operating sounds
1, 2
6
FS
Sound effect: Bell
7
Sound 3
Sound on/off
8
ABV, off
9
Sound effect: Horn sequence before a grade crossing
10
Sound 15
Third headlight
11
Marslight
12
AUX 1
Long distance headlights
13
AUX 6
Sound effect: Sanding
14
Sound 17
Engineer‘s cab lighting
15
AUX 2
Sound effect: Announcement
16
Sound 5
Sound effect: Announcement
17
Sound 6
Sound effect: Station announcements
18
Sound 20
Sound effect: Announcement
19
Sound 4
Sound effect: 4 x Short Horn
20
Sound 16
Sound effect: Letting off air
21
Sound 14
Sound effect: Rail joints
22
Sound 19
Sound effect: Coupling together
23
Sound 18
1
active in analog operation
2
with random sounds
Summary of Contents for 20585
Page 1: ...Modell der Santa Fe Diesellok F7 A 20585...
Page 2: ...2...
