background image

17

16

CV62

Back-EMF: Max. Adjustment (0: small, 255: max.)

(0..255)

[255]

Limits the total adjustment in motor voltage. If there is a very 
large load on the motor, the adjustment will not exceed this 
value - for more realistic operations, so that locos will slow a 
bit on grades.

CV67

Speed steps programmed by user (see CV29):

(0..255)

to

28 speed steps are programmed in CV67 to CV94.

CV94

With LGB MTS, every second value is skipped (14 speed steps).
Factory pre-set speed steps:
7, 9, 11, 13, 16, 20, 24, 28, 32, 36, 42, 48, 54, 60, 68, 76, 84, 
92, 102, 112, 124, 136, 152, 168, 188, 208, 230, 255
Pre-set values for user-programmable speed steps:
8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120, 
128, 136, 144, 152, 160, 168, 176, 184, 192, 208, 224, 240, 255

Hint: 

The speed steps are factory pre-set and programming is 

not necessary. Use the 55045 MTS PC Decoder Programming
Module for programming.

General programming procedure
with 55015 Universal Remote:

- Registers CV1 through CV4 can be

programmed directly by program-
ming the desired function value in
the register.

- To program higher CVs:

- In register CV6, input the number

of the register you want to pro-
gram.

- Then input the desired function

value in register CV5.

Example:

Set hand-over function to ON (pro-
gram register CV54 to function value
3).
To program:
- Display shows “P --”
- Select register CV6 (press 6).
- Input 54 (register you want to pro-

gram).

- Execute programming (press right

arrow button).

- Display shows “P --”
- Select register CV5 (press 5).
- Input 3 (selected function value)
- Execute programming (press right

arrow button).

When programming with the 55045,
all function values are programmed
directly.

AUTHORIZED SERVICE

Improper service will void your war-
ranty. For quality service, contact
your authorized retailer or one of the
following LGB factory service stati-
ons:

Ernst Paul Lehmann Patentwerk

Reparatur-Abteilung
Saganer Strasse 1-5
D-90475 Nürnberg
GERMANY
Telephone: (0911) 83707 0
Fax: (0911) 83707 70

LGB of America

Repair Department
6444 Nancy Ridge Drive
San Diego, CA 92121
USA
Telephone: (858) 795-0700
Fax: (858) 795-0780
You are responsible for any shipping
costs, insurance and customs fees.

Hint: 

Information on LGB products

and LGB representatives around the
world is available online at
www.lgb.com

CAUTION!

This model is not for

children under 8 years of age. This
model has small parts, sharp parts
and moving parts. The locomotive
drive rods can pinch and bind. Save
the supplied packaging and instruc-
tions.

Products, specifications and availa-
bility dates are subject to change
without notice. Some products are
not available in all markets and at all
retailers. Some products shown are
pre-production prototypes. LGB,
LGB of America, LEHMANN and the
LGB TOYTRAIN logotype are registe-
red trademarks of Ernst Paul
Lehmann Patentwerk, Germany.
Other trademarks are the property of
their owners. © 2003 Ernst Paul
Lehmann Patentwerk.

Summary of Contents for 22741













Reviews: