background image

MZS-Zentrale · MTS Central Station · Poste Central SMT

55005

8.869110.211

6

•  AUTORISIERTER SERVICE

Bei unsachgemäßer Wartung wird Ihre
Garantie ungültig. Um fach-gerechte
Reparaturleistungen zu erhalten, wenden
Sie sich an Ihren Fachhändler oder an die
LGB-Service-Abteilung:

Ernst Paul Lehmann
Patentwerk
Reparatur-Abteilung
Saganer Straße 1-5
D-90475 Nürnberg
DEUTSCHLAND
Tel.: (0911) 83707 0
Telefax: (0911) 83707 70

• Die Einsendung erfolgt zu Ihren

Lasten.

• Hinweis: Informationen zur LGB

und zu LGB-Vertretungen in aller
Welt finden Sie im Internet unter
www.lgb.de

•  AUTHORIZED SERVICE

Improper service will void your warranty.
For quality service, contact your
authorized retailer or one of the following
LGB factory service stations:

Ernst Paul Lehmann
Patentwerk
Reparatur-Abteilung
Saganer Strasse 1-5
D-90475 Nürnberg
GERMANY
Telephone: (0911) 83707 0
Fax: (0911) 83707 70

LGB of America
Repair Department
6444 Nancy Ridge Drive
San Diego, CA 92121
USA
Telephone: (858) 535-9387
Fax: (858) 535-1091

You are responsible for any
shipping costs, insurance and
customs fees.

Hint: Information on LGB repair
centers around the world is
available online at www.lgb.de.

•  CENTRES D’ENTRETIEN
   AUTORISÉS

Un manque d’entretien rendra la garantie
nulle et non avenue. Pour un service
après-vente de qualité, entrez en contact
avec votre revendeur autorisé ou avec
l’un des centres d’entretien suivants  :

Ernst Paul Lehmann 
Patentwerk
Reparatur-Abteilung
Saganer Strasse 1-5
D-90475 Nuremberg
ALLEMAGNE
Téléphone :  (0911) 83707 0
Fax :  (0911) 83707 70

LGB of America
Repair Department
6444 Nancy Ridge Drive
San Diego, CA 92121
États-Unis
Téléphone :  (858) 535-9387
Fax :  (858) 535-1091

L’expéditeur est responsable des
frais d’expédition, de l’assurance
et des frais de douane.

Conseil  : Pour des renseigne-
ments au sujet des produits et
des représentants  LGB à travers
le monde, consultez le site web
à www.lgb.com.

Summary of Contents for 55005



























Reviews: