This can be tested this by pressing the plus
(+)
button the controls the temperature setting on
the LCD display, to raise the temperature above the current room temperature. The LCD light
will then flash across the button of the display.
When it stops a red LED light will light up on the receiver, indicating that now the radiator is
ready to heat up.
Step 8
Once the room receives the required temperatures set on the thermostat, the red LED light
will go
OFF
on the receiver. To test this, simply push the minus
(-)
button on the to drop the
temperature setting on the display below the current room temperature and the red-light will
go off indicating that the radiator has stopped to heat up.
Summary of Contents for Radiator
Page 1: ...LHZ USER GUIDE ...