Pearl® Imager Accessories
8) Hold the base of the rotameter stand and press the charcoal filter down onto the port labeled
“EXHAUST” on the exterior of the rotameter. Alternatively, connect a user-supplied charcoal fil-
ter assembly to the EXHAUST port. Recommendations for monitoring and replacement of the
charcoal filter are given in Chapter 3 of the Pearl Imager Operator's Manual.
Figure 1-6. The included charcoal filter or a user supplied charcoal filter
presses onto the external output port on the docking station rotameter.
9) Connect the power supply to a wall outlet and then to the back of the Pearl Docking Station.
Figure 1-7. Power connector on the docking station.
Page 5
Summary of Contents for 5700-DS
Page 1: ...Pearl Trilogy Accessories Manual...
Page 2: ......
