background image

Notice

The information contained in this document is subject to change without notice. LI-COR MAKES NO
WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
LI-COR shall not be liable for errors contained herein or for incidental or consequential damages in connection with
the furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of
this document may be photocopied, reproduced, or translated to another language without prior written consent of
LI-COR, Inc.

Printing History

Publication Number 984-18616
Printed: February 2015
Revised: September 2019

LI-COR Biosciences is an ISO 9001:2015 certified company. © 2019 LI-COR, Inc. Specifications subject to change.
LI-COR, Pearl, In-Cell Western, IRDye, Odyssey, and Image Studio are registered trademarks of LI-COR, Inc. in the
United States and other countries. All other trademarks belong to their respective owners. The Odyssey Infrared
Imaging Systems and IRDye reagents are covered by U.S. patents, foreign equivalents, and patents pending.

iv

Summary of Contents for 5700-DS





















Reviews: